536726
20
Zoom out
Zoom in
Vorherige Seite
1/62
Nächste Seite
18
Press to exit Walk Test and return to the top
level Test Mode menu.
RF ENVIRONMENT TEST
Scroll through the top level Test Mode menu until RF
Environment is displayed.
If the ambient environment is full of radio frequency, an
indication of
ENVIRON . . POORwill be shown
on the LCD screen.
DIGITAL DIALER TEST
Scroll through the top level Test Mode menu until
‘DIGITAL DIAL TEST’ is displayed and press .
In order to test the digital dialer properly, the
prerequisite is to set the telephone number, unit ID
number and to turn on ‘4-2-1 Monitor Center’ in the
programming mode. If the telephone number is o.k,
‘TEST….PASS’ will be shown. If ‘TEST….FAIL is
shown with ‘LINE STATUS’ LED flashing, please check
the telephone line is well connected and retry the test
again.
When testing is in progress, simply press to
stop testing.
VOICE DIALER TEST
Scroll through the top level Test Mode menu until
‘VOICE DIAL TEST’ is displayed and press .
In order to test the voice dialer properly, the
prerequisite is to set the telephone number, record the
message for main and intruder, and to turn on voice
dial in the programming mode. If ‘LINE STATUS’ LED
is flashing, please check the telephone line is well
connected and retry the test again.
When testing is in progress, simply press to
stop testing.
WIREFREE SIREN SERVICE ON/OFF
Scroll through the top level Test Mode menu until
‘Wirefree Siren Service ON/OFF’ is displayed and
press .
This offers the flexibility of removing or changing siren’s
battery. Wait for 10 seconds until ON/OFF duration
has elapsed, then go ahead with fixing the siren as
desired.
ALARM TEST
Scroll through the top level Test Mode menu until
‘ALARM TEST’ is displayed and press .
Scroll though the menu until the required alarm
displayed and press to operate the selected
alarm for 5s.
Select ‘Wirefree Siren Test’ to operate the External
Solar Siren.
Select ‘Hardwire Siren Test’ to operate the Smart
Home Box Siren and external hardwired Siren (if
connected).
Select ‘Relay Test’ to operate the External hardwired
(N.O./N.C.) relay contacts.
Press to exit Alarm Test and return to the top
level Test Mode menu.
DEFAULT SETTINGS
User Setup
Admin: 1234
Password
User 1~7:
Not Programmed
Name Admin. User 1~7
Tel/SMS Remote Admin: ON
User 1~7: OFF
Latchkey Report OFF
Record User Message Not Programmed
Replay User Message Not Programmed
Remoter Not Programmed
Home Box Setup
Alarm Time 180s
Internal Siren ON
Wire Siren ON External
Siren
Wireless Siren ON
20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Elro HIS20SF wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info