Bedienungsanleitung Elro HIS20SF (Seite 44 von 62) (Deutsch, Englisch, Holländisch, Französisch)

536726

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

Green Home setting is designed specially for home

automation types of devices, i.e. device with 433 MHz

radio frequency. Scroll through the top level

programming menu until ‘6. GREEN HOME’ is

displayed and press .

Note: To return to top level programming menu, press

Green Control

For receiver type of devices (e.g. ON/OFF plug,

dimmer), scroll through the menu until ‘6-1 Green

Control’ is displayed.

Enter green control number (1-32) to be configured and

press .

Code Learning

This enables the green control learns ID code from the

Home Box.

Firstly, press the knob of the receiver for 3 seconds

until the LED flashes rapidly, and then release the knob.

The receiver is waiting to learn the ID code.

Set the Smart Home Box into code learning status,

scroll through the menu until ‘:1 Link Panel to

Control’ is displayed and press .

Press On/Off knob on the receiver to receive ID code

from the Smart Home Box instantly.

Two possibilities would happen as follows:

Sending ID code Wait 2s – the ID code was emitted

from Smart Home Box.

Wait 2 Second Test – the code was learned by the

receiver. The receiver turns On/Off automatically

once after learning was successful.

Note: DO NOT connect the receiver to light fixture,

electrical fans or any other appliance to avoid possible

dangers which might be caused during this 2-Second

Test.

Alarm Trigger

This controls devices of a group to turn on/off once

alarm is on. Scroll through the menu until ‘:2 Alarm

Trigger’ is displayed.

Default setting: off

To change the setting press .

Press to enable the devices, or

Press to disable the devices.

Note: Please pay attention to the appliance that is

connected to the green control. If Alarm Trigger is

set to ON, the green control will activate automatically

once the alarm is triggered and the appliance such as

coffee maker connected to the green control will start

cooking. It could be dangerous if no one is at home.

All Turn ON

This sets the receivers of this group is to turn ON/OFF.

Scroll through the menu until ‘:3 All On’ is displayed.

Default setting: OFF

To change the setting press .

Press to turn on the group devices, or

Press to turn off the group devices.

SMS Remote (for GSM Gateway)

It enables/disables the device to be controlled remotely.

For instance, if the green control is connected with a

coffee maker and this feature is set to OFF, then this

coffee maker cannot be set to ON via remote control.

To enable/disable this function, scroll through the menu

until ‘:4 SMS Remote’ is displayed.

Default setting: OFF

To change the setting press .

Press to enable SMS Remote, or

Press to disable SMS Remote.

Model Type

To select device type, scroll through the menu until ‘:5

Model Type’ is displayed and press .

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Elro HIS20SF Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info