- 5 -
- If the space is divided by a wall or, for example, a large cupboard: on the same side as the
combustion appliance
- Preferably on the ceiling:
o At a minimal distance of 30 cm from the wall.
o In the centre of the room.
- If ceiling mounting is not possible, the device can be mounted on the wall:
o Approximately 15-30 centimetres from the ceiling
o Above the top of windows/doors near the combustion appliance.
• In rooms without a combustion appliance, install the carbon monoxide detector on the wall at
breathing height. The breathing height depends on the type of room: in a bedroom, you
consider the breathing height from a sleeping position; in an office, you consider the breathing
height in a sitting position; and in a corridor, you consider the breathing height in a walking
position.
NOTE: Never place a carbon monoxide detector in the following locations:
• Behind objects that block the airflow, such as cupboards and curtains.
• In locations where the LCD screen and LED indicators are not visible.
• Near air in- and outlets such as windows and doors.
• Directly above a sink or washbasin.
• Next to an extractor hood, ventilation grid or air conditioning.
• Areas where the temperature falls below - 10 °C or rises above 52 °C.
• In areas where dust or dirt can block the sensor.
• In damp areas.
Assembly
1. Take the mounting bracket and mark the positions of the drill holes.
2. Drill 2 holes with a diameter of 5 millimetres.
3. Push the plugs into the holes.
4. Hang the mounting bracket in the correct location and secure it with the screws.
5. Screw the carbon monoxide detector onto the mounting bracket. The carbon monoxide
detector will switch on automatically.
