Bedienungsanleitung Elta 2422 (Seite 9 von 71) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch)

159872

Zoom out

Zoom in

Vorherige Seite

1/71

Nächste Seite

17. 16.

REMOTE CONTROL

1. STOP button

2. REW button

3. PROG button

4. FOLDER UP button

5. REP / RAND button

6. PLAY / PAUSE button

7. F.FWD button

8. Battery compartment

CHANGE BATTERIES

1. Open the battery cover at the rear of the remote control.

2. Insert 2 x AAA batteries while observing the polarity. We recommend the use of alkaline

batteries.

3. Close the battery compartment properly.

POWER SUPPLY (MAINS 230V ~ 50HZ)

Connect the power supply cable plug to a (230V ~ 50Hy) wall outlet.

Warning:

• Before using the device, check that the local mains power supply is compatible with the HI-FI

System (230V ~ 50Hz).

• Do not plug or unplug the power supply cable with wet hands.

• When planning not to use this unit for long periods of time (i.e. vacation, etc.) disconnect from

the wall outlet.

• When disconnecting from the wall outlet, please pull the plug; do not pull the cord in order to

avoid electric shock caused by the damaged cable.

BATTERY SAFETY PRECAUTIONS:

• Keep batteries away from children and pets.

• Insert the batteries observing the polarity (+/-). Failure to properly align the battery polarity can

cause damage and/or property damage.

• Remove exhausted batteries from the device. Remove the batteries when the device will not be

used for extended periods of time to prevent damage due to battery leakage.

• Never throw batteries into the fire. Do not expose batteries to fire or other heat sources.

• Battery disposal: exhausted batteries must be properly disposed of and recycled in compliance

with all applicable laws. For detailed information contact your local municipality’s waste authority.

• Follow the battery manufacturer’s safety, usage and disposal instructions.

BACKUP BATTERY

Two 1.5V “AA” batteries (not included) may be installed as a backup option to maintain the time in

case of power failure. In the event of a power outage, the time will not be displayed; however, the

clock will continue to operate and the actual time will be maintained. The LCD display and other

functions will resume once electrical power is restored. The backup batteries should be replaced as

needed; remove the batteries if the clock is not used or stored for long periods of time.

SET CURRENT TIME

Connect the AC power cord to a wall outlet.

1. While pressing and holding the TIME SET button, press the HOUR button to set the desired

hour.

2. While pressing and holding the TIME SET button, press the MIN button to set the desired

minutes.

SET ALARM

1. While pressing and holding the AL.SET button, press the HOUR button to set the desired alarm

hour.

2. While pressing and holding the AL.SET button, press the MIN button to set the desired alarm

minutes.

3. After setting the alarm time, remember to press the AL.ON / OFF button to turn on the alarm

function (alarm icon will be displayed in the LCD).

NOTE:

1. When sliding the function switch to BUZZ position the unit will turn to standby mode.

2. When sliding the function switch to BUZZ position, the unit cannot be turned on with the POWER

button until sliding the switch to CD / MP3 / RADIO / AUX mode.

WAKE UP TO ALARM BUZZER:

a. Slide the BUZZ / CD / MP3 / RADIO / AUX function selector to BUZZ position.

b. The alarm buzzer will sound for 3 minutes at the set alarm time.

Note: Press the AL.ON / OFF button to turn off the alarm.

WAKE UP TO CD:

a. Slide the BUZZ / CD / MP3 / RADIO / AUX function selector to CD position.

b. Open the CD door manually and insert a CD (with the label side facing up) into the CD

compartment.

c. Close the CD Door manually.

d. The CD will sound at the set alarm time playing the first track on the CD.

Note: The unit will automatically be turned off after 1 hour.

To deactivate the alarm (CD) manually, press the STOP Button.

WAKE UP TO RADIO:

a. Slide the BUZZ / CD / MP3 / RADIO / AUX function selector to RADIO position.

b. Slide the FM ST. / FM MO / AM band selector to AM or FM position.

c. Press the POWER button to turn the unit on.

d. Tune the radio with the ◄TUNING► control knob to a broadcasting station and adjust the

volume.

e. Then press the POWER button to turn off the unit.

f. The radio will sound at the set alarm time.

Note: The unit will automatically be turned off after 1 hour.

To deactivate the alarm (Radio) manually, press the POWER button.

TURN OFF ALARM

To cancel the alarm mode:

Press the AL.ON / OFF button to turn off the alarm function (the alarm icon in the LCD display

turns off).

ADJUST VOLUME

• Press VOL + button to increase the volume.

• Press VOL - button to decrease the volume.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Elta 2422 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info