ATTENTION
This unit fulfils the highest technical standards. In case of any disorder remove the AC power cord and batteries for a few
minutes, so that the unit is absolutely disconnected from power. Then energize the unit again.
This unit is specially designed to be installed under the kitchen cabinet (please use provided screws). It is also possible to place
it at a table by using the stand feet.
CLOCK SETTING
1. Set the Function switch (1) to “OFF”.
2. Hold down the Time Set button (8) for 2 seconds. [The current time flashes]
3. Press the Hour Set button (12) to set the hour.
[Hold down the Hour Set button (12).]
4. Press the Minute Set button (13) to set the minute.
[For fast setting, hold down Minute Set button (13).]
5. Press Hour Set button (8) again to confirm.
The current time will always be displayed.
[If you do not press any button within 8 seconds, the time will be displayed with the current setting.]
RADIO OPERATION
1. To switch on the radio, slide the Function Switch (1) to the "ON" position.
[The current frequency will be displayed for 10 seconds.]
2. Then adjust your desired sound volume level by turning the Volume Control (14).
3. Use the Station Search up button (12) and the Station Search down (13) button for manual setting step for step up or
down.
4. Press and hold down the Station Search up button (12) and the Station Search down (13) button for a fast up and
down station search.
[After starting the fast station search, detach the button. The station search will start automatically.]
[The search will end, once a high frequence signal will be received.]
You can continue the search by repeating step 5, till the desired station will be found.
5. To switch off the unit, slide the Function switch (1) to "OFF" position.
NOTE: For the best reception, un-wire the
EExxtteerrnnaall FFMM WWiirree AAnntteennnnaa ((1177))
and strap the end somewhere.
STORE AND PLAY YOUR FAVOURITE STATIONS
Please store your favourite stations as follows:
1. Switch ON the radio and search for the desired station.
[See “RADIO OPERATION” for more details.]
2. Press the Storing button (10) one time.
[The symbol “M” flashes.]
3. Press the Storing station button (3)-(7) to store the station with the desired number (1-5).
[To store stations 6-10, please press Storing Station button (+5) (8) one time and then press Storing Station button
(3)-(7) accordingly.]
4 [If you do not press any button within 8 seconds, the current setting will be stored automatically.]
Play your stored stations:
1. Switch ON the radio.
2. Press Storing Station button (3)-(7) to choose the prestored station.
[To store stations 6-10, please press Storing Station button (+5) (8) one time and then press Storing Station button
(3)-(7) accordingly.]
8.
