Bedienungsanleitung Elu PS274 (Seite 28 von 96) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

673527

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

en - 7 22

ENGLISH

Cutting non-ferrous metals

When cutting non-ferrous metals, the machine is only to be used to

perform vertical straight and mitre cross-cuts in the mitre saw mode.

We recommend that bevel and compound mitre cuts should not be

performed in non-ferrous metals. The machine is not to be used for cutting

ferrous metals.

• Always use a material clamp when cutting non-ferrous metals.

Make sure that the workpiece is clamped securely.

• Only apply saw blades that are qualified for cutting non-ferrous metals.

• When using lubricants, only apply wax or separation spray. Do not use

emulsions or similar fluids.

• Connect an FI or DI switch between machine and mains to avoid

residual risks caused by metal swarf.

The FI switch should comply with the following specifications:

rated voltage 230 V

rated current 16 A

reaction time < 15 ms

fusing current 30 mA

The DI switch should comply with the following specifications:

DIN VDE 0661

rated voltage 230 V

rated current 16 A

fusing current 30 mA

all-pole cutoff L+N+PE

PE monitoring

low-voltage release

Consult your dealer for further information on the appropriate accessories.

Transporting (fig. A1 & A2)

• To transport the saw, set the bevel and mitre positions to 0°.

• Press the combined lower guard and head lock up release lever (2) (fig. A1).

• Press the head down and press the lock down button (22) (fig. A2).

• Bring the saw blade to rest position and press the traverse lock (17).

• Always use the carrying handle (3) to transport the saw.

Maintenance

Your Elu Power Tool has been designed to operate over a long period of

time with a minimum of maintenance. Continuous satisfactory operation

depends upon proper tool care and regular cleaning.

Lubrication

Your Power Tool requires no additional lubrication.

Cleaning

Keep the ventilation slots clear and regularly clean the housing with a soft cloth.

Unwanted tools and the environment

Take your tool to an Elu authorized repair agent where it will be disposed

of in an environmentally safe way.

Elu After-Sales service

All Elu products are thoroughly tested before leaving the factory.

However, if the product needs repair, please contact your dealer or the

Elu Head Office for the address of the nearest Elu authorized repair agent

(please refer to the back of this manual).

GUARANTEE

• ONE YEAR FULL WARRANTY •

If your Elu product becomes defective due to faulty materials or

workmanship within 12 months from the date of purchase,

we guarantee to replace all defective parts free of charge or,

at our discretion, replace the unit free of charge provided that:

• The product has not been misused.

• Repairs have not been attempted by unauthorized persons.

• Proof of purchase date is provided.

This guarantee is offered as an extra benefit and is additional to

consumers statutory rights.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Elu PS274 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info