Bedienungsanleitung Emax CRA 6322-1 (Seite 7 von 16) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

553585

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

 G E N E R A L  I N F O R M AT I O N 

Carefully read this use and maintenance manual, where

important information about installation, use and mainte-

nance safety is provided. Keep this manual for future ref-

erence. Any installation operation (electric connections)

shall be performed by specialized personnel, in compli-

ance with all standards and regulations in force.

 S A F E T Y WA R NI N G 

The use of flat-bottomed pots, with a diameter equal to

or slightly bigger than the heated area, is recommended.

(Fig.5). Do not use pots that have a rough base, in order

to prevent the hob thermal surface from being scratched.

This appliance is not intended for use by children or in-

firm people without supervision.

IMPORTANT

- Avoid the overflow of liquids by reducing the heat

supply when boiling or warming liquids.

- Do not leave any heating element switched on, if

there are no pots, or if the pots are empty.

- Once cooking is completed, turn the concerned

heating element off, by using the control shown be-

low.

- This appliance is not intended for use by people

(children included) with limited physical, sensorial or

mental abilities, or lacking of experience and knowl-

edge, unless they are supervised or well instructed

about the use of the appliance, by a person who is

responsible for their safety.

- Children should be supervised to assure that they

do not play with the appliance.

- If the hob surface is cracked, turn the appliance off

and disconnect it from the electric network , so as to

avoid the possibility of electric shock.

INSTALLATION INSTRUCTIONS

These installation instructions are intended for a special-

ized installer and are meant as guidelines for the hob

installation, adjustment and maintenance, in compliance

with any regulations and standards in force. If a built-

in oven or any other appliance generating heat is to

be mounted directly under the vitro-ceramic hob, IT IS

NECESSARYTHATSUCHANAPPLIANCE(theoven)

ANDTHEVITRO-CERAMICHOBAREPROPERLYIN-

SULATED. Failure to comply with this precaution might

result in the incorrect operation of the TOUCH CON-

TROL system.

•Positioning:

This household appliance has been designed for built –in

installation onto a worktop, as shown in the figure (Fig.2).

Use sealing material along the whole perimeter - Fig.4

(Cut dimensions- Fig.2). This operation is necessary in

order to prevent any liquid from entering inside the hob,

being that the flatness of the top, the glass and their cou-

pling cannot be assured. Fix the appliance on the work-

top by using the 4 supports, taking the work top thickness

into account (Fig.2). If, after installation, the lower part

of the appliance is accessible from the lower part of the

ENGLISH

cabinet, it will be necessary to mount a spacing panel at

the distances given (Fig.3). If the appliance is installed

under an oven, this step will not be necessary. The appli-

ance is not intended to be operated by an external timer

or a separate remote control system.

•Electricconnections(Fig.7):

Before carrying out any electric connections, please

make sure that:

- the ground electric cable is 2 cm. longer than the other

cables;

- the electrical system meets any requirement mentioned

in the rating label found on the underside of the work top;

- the electrical system is equipped with an efficient

grounding system and compliant with any standards and

law directives in force.

The grounding system is required by law.

In the case the appliance is not equipped with a pow-

er cord and/or the related plug, please use a material

suitable for the power absorption value mentioned in the

rating label and for the operating temperature. If a direct

connection to the electric network is required, you need

to use an omnipolar power switch with a switch-contact

gap of at least 3 mm, suitable for the value mentioned

in the label, and compliant with the related standards in

force (the yellow/green ground connection shall not be

interrupted by the change-over switch).

Once the appliance installation is completed, the omnip-

olar switch shall be easily accessible.

USE AND MAINTENANCE

•Maintenance(Fig.6):

Remove any food residue and grease drops from the

cooking surface, by using the special scraper provided

on request.

Clean the heated area in the best way possible, using

suitable products and a paper towel, then rinse with wa-

ter and wipe away with a clean cloth.

Through the use of the special scraper (optional),

promptly remove any pieces of aluminum foil and plastic

material, which might have accidentally melted, or sugar

or food remains, and/or remains of sugary foods, from

the heated surface. In this way, any possible damage to

the surface is prevented.

The use of abrasive sponges or irritating chemical clean-

ers, such as sprays for ovens or cleaning agents is not

allowed under any circumstance.

•Use:

Use the touch control system related to the position cor-

responding to your cooking needs, bearing in mind that

the higher is the number selected the higher is the heat

ow.

•Operation(Fig.1):

A - On/Off Key

B - Control lock key

C - “-” key

D - “+”key

E - Double zone key

F-Cooking zones display

G - Cooking zone selection key

H - Timer key

•Startingthehob:

Press key A to switch the hob on.

Emax CRA 6322-1 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info