Bedienungsanleitung Emerio FH-117198 (Seite 8 von 41) (Deutsch, Englisch, Französisch, Italienisch)

701417

Zoom out

Zoom in

Vorherige Seite

1/41

Nächste Seite

- 7 -

5. Timer button

Under working condition, you can press button “ ” to set timer.

Press the button “ ” once, the appliance enters the timer setting mode. You can press “ ” to adjust the

timer from 0 – 8H (each press changes the value of one hour and “0H” means no timer). The corresponding timer

value will be shown on the digital display. The set timer will be activated in 5 seconds without any other operation

and then the digital display will show back the room temperature. The icon “ ” on the display indicates the

timer has been set. When the timer is counting down to 0 (not shown on the display), the appliance will stop

working automatically (a beep sound will be sent out) and enter standby mode.

Note:

 If no operation for 10 minutes, the digital display and indicator light will go out. Press once any one of the

buttons can make the display and indicator light come back.

 The heater will remain hot for some time after it is turned off; handle it with care.

REMOTE CONTROL

This unit has a remote control. One piece of CR2025 battery should be used for it. The remote control can set

the desired temperature by pressing adjustment button “ ” or “ ”, which cannot be adjusted on the

appliance’s control panel, besides, other functions of the remote control buttons are the same as of the buttons

on the control panel. Follow the illustration on the back of the remote control to place or remove battery. Pay

attention to the battery polarity when placing the battery.

SAFETY SYSTEM

 The appliance has a safety system which automatically switches off the unit when overheated.

 If overheating occurs, switch off the appliance, remove the plug from the socket, and let it cool down for at

least 30 minutes. Put the plug in the socket and switch on the heater.

 This heater is equipped with a tilt protection safety device. For safety reasons, the unit will automatically

switch off the power if it is put on unstable or uneven surfaces or if it is tilted accidentally.

CLEANING AND MAINTENANCE

 Before maintaining, please unplug the appliance and make sure the heater has cooled down completely.

 Please use soft cloth to wipe the dust on the appliance’s surface.

 Do not use gasoline, thinner and any other abrasive cleaners to clean the appliance, as these can damage

the surface of appliance.

 Make sure the appliance is cooled and dried before packaging. Store it in dry and ventilated places.

TECHNICAL DATA

Operation voltage: 220-240V ~ 50Hz

Power: 2000W

GUARANTEE AND CUSTOMER SERVICE

Before delivery our devices are subjected to rigorous quality control. If, despite all care, damage has occurred

during production or transportation, please return the device to your dealer. In addition to statutory legal rights,

the purchaser has an option to claim under the terms of the following guarantee:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Emerio FH-117198 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info