Bedienungsanleitung Emerio FH-117208 (Seite 7 von 49) (Deutsch, Englisch, Holländisch, Französisch, Polnisch, Schwedisch)

701060

Zoom out

Zoom in

Vorherige Seite

1/49

Nächste Seite

- 6 -

3. Timer / Temperature button

Timer: Press the button or to set the timer from 0 – 24hours (0 = no timer). The corresponding

timer value with a symbol “h” will be shown on the digital display. The set timer will be activated in 5 seconds

without any other operation and then the digital display will show back the set temperature.

Temperature: Press the button or to set the temperature from 15 – 35℃. The corresponding

temperature value with a symbol “

SET

℃”will be shown on the digital display. The set temperature will be

activated in 5 seconds without any other operation.

Note:

1) After timer and temperature are set, the digital display will show the set time and temperature alternatively.

If you do not set the timer and only set the temperature, the digital display will show the set temperature

only.

2) Once the timer is counting down to 0 (not shown on digital display), the appliance will stop working

automatically and enter into standby mode.

3) Once the set temperature is reached, the appliance will stop working, as well as the swing function if you

have set before. Once the room temperature is lower than the set temperature by 2℃, the appliance will

resume working automatically, as well as the swing function if you have set before. If you have set the timer,

please note the time for standby mode will not be counted as the set time.

4) This appliance begins to sense the room temperature in 10 seconds after the appliance is turned on, so even

your set temperature is already above the current room temperature, the appliance will still work for 10

seconds and then turn off automatically.

4. Power setting button

Under working condition, you can press button “ ” to switch the power setting between low heating power

and high heating power. This button is inactive when the appliance stops working.

- Low heating power: Icon “ ” will be shown on the digital display.

- High heating power: Icon “ ” will be shown on the digital display.

5. ECO button

Under working condition, you can press button “ ” to switch the appliance into ECO mode. The icon “ ”

will illuminate on the digital display. When the ECO function is operating, the button “ ” and temperature

adjustment are not active. You can press button “ ” again to exit form ECO mode.

When appliance is in ECO mode, the temperature will be set at 22℃ by default. Under this condition, when the

room temperature is lower than 18℃, the high heating power works automatically; when the room temperature

is higher than 18℃ but lower than 22℃ , the low heating power works automatically. When the room

temperature reaches 22℃, the appliance stops working automatically.

6. Fireplace illumination button

Press the button “ ” to turn on or turn off the fireplace illumination.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Emerio FH-117208 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Emerio FH-117208

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info