701954
14
Zoom out
Zoom in
Vorherige Seite
1/36
Nächste Seite
MG-201798.1 EN
DESCRIPTION
1. Hopper plate
2. Motor housing
3. ON/OFF/ Reverse switch
4. R / ON switch
5. Locking knob hole
6. Locking knob
7. Food pusher
8. Head
9. Feed screw
10. Cutting plate (fine)
11. Cutting plate (medium)
12. Cutting plate (coarse)
13. Fixing ring
14. Cutting blade
15. Sausage attachment
16. Kibbe attachment
17. Head inlet
FOR THE FIRST TIME
1. Check that voltage indicated on the rating label corresponds to the mains voltage in your home.
2. Wash all parts (except body) in warm soapy water.
3. Before plugging in, ensure the “ON/OFF/ Reverse” switch is turned to "OFF" position.
FOR USE
ASSEMBLING
1. Place the feed screw into the head, long end first, by turning the feed screw slightly until it is set into the
motor housing (fig.1).
2. Place the cutting blade onto the feed screw shaft with the blade facing the front as illustrated (fig.2). If it is
not fitted properly, meat will not be ground.
3. Place the desired cutting plate next to the cutting blade, fitting protrusions in the slots (fig.3).
4. Support or press the centre of the cutting plate with one finger then screw the fixing ring until tight with
another hand (fig.4). Do not over tighten.
5. Holding the head and insert it in the inlet with one hand, tighten it by turn the LOCKING KNOB clockwise
to secure the head (fig.5, 6).
6. Place the food chute on the head and fix into position.
7. Locate the unit on a firm place.
8. The air passage at the bottom and the side of the motor housing should be kept free and not blocked.
14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Emerio MG-201798.1 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info