702111
7
Zoom out
Zoom in
Vorherige Seite
1/94
Nächste Seite
- 6 -
STEAM IRONING
1. Fill the water tank, as described before initial usage.
2. Steam ironing can be used in the temperature ranges ●●, ●●● MAX. For the reliable functioning of the steam
ironing, the water tank must be at least ¼ filled.
3. Select the setting on the temperature regulator.
4. When the indicator light goes off, the required temperature is reached. The iron is ready for use.
5. Set the steam control knob to position for steam ironing; steam starts coming out from the holes in
the soleplate while ironing.
6. The iron surface must always be kept in an upright position.
7. To turn off, turn the temperature regulator counter-clockwise to “OFF” and pull out the power plug.
8. Turn the appliance upside down and carefully pour the remaining water out of the water tank. Carefully
shake the appliance.
Notice: With conventional steam ironing, water may leak from the soleplate if a too low temperature has been
selected. If this happens, turn the temperature regulator to the advised position. Steam will recommence as soon
as the appropriate temperature has been reached.
AUTOMATIC ELECTRICITY INTERRUPTION FOR SECURITY
In case the installed thermostat gets out of order, the appliance will be automatically cut off to avoid the
overheating. If this happens, send the appliance for repair.
SELF-CLEAN FUNCTION
According to frequency of use it is recommended that you should monthly clean the steam iron - this will increase
the steam iron’s life span.
If the water is very hard in your area, use the self-clean function every two weeks.
1. Make sure the appliance is unplugged.
2. Fill the water tank to maximum level.
3. Select the maximum ironing temperature.
4. Put the plug in the wall socket.
5. Unplug the iron when the temperature indicator light goes off.
6. Hold the iron over the sink, turn and hold the steam control knob to position “self-clean”, and gently shake
the iron to and fro. (Steam and boiling water will come out of the soleplate. Impurities and flakes (if any) will
be flushed out).
7. Repeat the self-clean process if the iron still contains a lot of impurities.
CLEANING
Before cleaning the iron ensure it is disconnected from the power supply and has completely cooled down.
Deposits on the soleplate may be removed with a rough cloth soaked in a vinegar water solution.
The casting may be wiped with a damp cloth and then polished with a dry one.
Do not use abrasives on the soleplate.
Keep the soleplate smooth. Avoid hard contact with metal objects.
TIPS
Which type of water to use?
Your appliance has been designed to function with untreated tap water. If your water is very hard, its possible to
mix untreated tap water with storebought distilled or demineralised water in the following proportion: 50% tap
water / 50% distilled water.
Which type of water not to use?
The types of water listed below contain organic waste or mineral elements that can cause spitting, brown staining,
or leakage: water from clothes dryers, scented or softened water, water from air conditioners.
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Emerio SI-120718.2 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info