612369
60
Zoom out
Zoom in
Vorherige Seite
1/228
Nächste Seite
27
|
ENGLISH
surveillance recorder. Make sure the hard disk is aligned with the four screw holes
and use the (supplied) screws to fix the hard disk.
5. Place the cover back onto the casing and tighten the screws again.
6. Connect al necessary cables and start the surveillance recorder.
7. Once the surveillance recorder has been started, click ‘Start’.
8. You need to login using an admin account. Fill out the password you have set
during the wizard and click ‘Login’ or do not fill out a password if you have not
used the wizard or if you do not have set a password and click ‘Login’.
9. Click ‘Disk’.
10. You will now see the status of the internal hard disk.
11. Place a mark at the ‘Format’ box.
12. Click ‘Format’.
13. Click ‘Yes’ at the ‘Are you sure you want to format this drive’ question after which
a ‘Formatting’ screen appears. Please be patient while the hard disk is being
formatted.
14. Click ‘OK’ at the ‘Formatting success!’ screen.
15. The internal hard disk is now ready to be used.
As long as the (new) hard disk has not been formatted using the menu of the
surveillance recorder, the surveillance recorder will make a beeping sound. This is an
indication the hard disk is not ready to be used.
14.0 Other functions
In the menu of the surveillance recorder, you will find a few functions which have not
been explained yet. In this chapter we will shortly explain these functions.
Main menu (default screen)
Auto Sequence: This function is located in the main menu of the surveillance
recorder. By using this function, the surveillance recorder will use
all available channels and shows each channel separately on
screen. The surveillance recorder will switch to another channel
automatically. You can change the ‘Auto sequence’ settings if you
are logged in the main menu and then select
‘BasicDisplayAuto sequence’.
Main menu (When logged in)
Disk: Here you can view the status of the built-in hard disk. You can
format the hard disk which is built-in the surveillance recorder.
You can also enable or disable the overwrite option, which is on
by default.
60

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Eminent EM6104 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info