2.0 Download and install the app
Download the app: E-SmartLife from Apple App store or Google Play Store.
2.1 Create account:
1. Tap “Register” (or if you already registered “Log in with existing account”).
2. Tap “Agree”
3. Select country code and enter full national phone number or email address and
tap “Get authentication code”.
4. Check your email or text messages for your authentication code.
5. Enter received authentication code and pick your own password.
6. Tap “Create location”
7. Enter location name.
8. Set geographic location by pressing “>”
9. Tap “Completed”
10. Tap “Completed”
2.2 Add device (QR-Code configuration)
1. Tap on "Add device" or "+" (top right corner). A list of potential products appears.
2. Select the device type you want to add from the list
3. Activate the device to be added by plugging it in.
4. Make sure a tone is heard (as shown in example in the application) and tap the
button to confirm. If a tone is not heard hold the reset button.
5. Confirm your phone is connected to the Wi-Fi network to which the device will be
added, (NOTE !!! The device can only be connected to 2.4 GHz WiFi networks),
enter the Wi-Fi password and press “Confirm”.
6. Read the instructions in the app and tap “Continue”
7. Hold the QR code in front of the camera and wait for a confirmation tone to be
heard and confirm in the App by tapping the button “Heard the Beep” when you
have heard the confirmation tone.
8. Now the device will be searched, make sure your phone and the device are close
to the router to optimize reception.
9. After the product is found and added, rename it so you can easily recognize it.
If above method fails (this can be due to unstable network or specific network
protection) add the device using WiFi Smart configuration by following the steps
below.
