499617
7
Zoom out
Zoom in
Vorherige Seite
1/9
Nächste Seite
7 | ENGLISH
5.1 Resetting the dimmer to the factory settings (Reset)
Under certain circumstances, it may be necessary to reset the dimmer to factory
settings and to reconfigure:
1. Press the dimmer's switch button three times within approx. 1.5 seconds (with an
insulated tool such as an insulated phase tester; Fig.1E). The LED (Fig.1F) in the
dimmer blinks.
2. Then press and hold the switch button for approx. five seconds until the LED
goes out. The dimmer has been reset to its factory settings.
Caution! When you reset to the factory settings, all the settings and connections for
this device are deleted. The radio system may no longer work and will need to be
reconfigured.
6.0 Z-wave Commands
Inclusion:
Have your Z-wave Controller entered inclusion mode, press the On/off button of the
mini switch three times.
Exclusion:
Have your Z-wave Controller entered exclusion mode, press the On/off button of the
mini switch three times. Once the node has been excluded, the LED will go into an
interval of two seconds on and two seconds off.
Reset:
Press the On/Off button three times to enter inclusion mode. Within one second, press
On/Off button again until LED is off. The home ID and node ID will be cleared and
reset to factory default.
7.0 Frequently Asked Questions
The latest frequently asked questions for your product can be found on the support
page of your product. Eminent will update these pages frequently to assure you have
the most recent information. Visit www.e-domotica.com/support/faqs for more
information about your product.
8.0 Service and support
This users manual has been carefully written by Eminent’s technical experts. If you
have problems installing or using the product, please fill out the support form at the
website
www.e-domotica.com/support/customer-service
You can also contact us by phone. Below you will find a list with phone numbers for
each supported country.
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Eminent EM6610 e-Domotica wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Eminent EM6610 e-Domotica

Eminent EM6610 e-Domotica Bedienungsanleitung - Deutsch - 10 seiten

Eminent EM6610 e-Domotica Bedienungsanleitung - Holländisch - 9 seiten

Eminent EM6610 e-Domotica Bedienungsanleitung - Französisch - 10 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info