17 | ENGLISH
2. Use the arrow keys to navigate to ‘Movies’.
3. Select ‘UPNP’ and press the ‘OK’ button.
4. Now you will see a list of available (media) servers in your network. Select the
desired UPnP (media) server and press the ‘OK’ button on the remote control.
The available media folders and files will now be displayed.
5. Select the media folder or file you want play and press the ‘OK’ button on the
remote control to start the playback of the file.
10.3 Play media through your network (Samba)
1. Make sure your media player is turned on and is completely started.
2. Use the arrow keys to navigate to ‘Movies’.
3. Select ‘SAMBA’ and press the ‘OK’ button.
4. Now you will see a list of available SAMBA and/or file servers. Select the desired
SAMBA or file server and press the ‘OK’ button on the remote control. The
available media folders or files will be displayed.
5. Select the media folder or file you want to play and press the ‘OK’ button on the
remote control to start the playback of the file.
11.0 Samba server of the EM7080
The EM7080 has a built-in Samba server. Devices which do support the Samba
protocol, can communicate with each other using the network and therefore are able
to exchange data from one device to the other. Using the following steps we will
explain how the EM7080’s Samba server can be used.
11.1 Activating the Samba server
1. Make sure you have built-in a hard disk in the media player. This mandatory,
the Samba server does require a hard disk.
2. Make sure the media player is started and you can see the media player’s
menu on the screen of your television or monitor.
3. Navigate using the remote control to ‘Setup’ and press the ‘OK’ button on the
remote control.
4. Navigate to ‘System’.
5. Select ‘HDD Format’ and press the ‘OK’ button. Use the instructions shown on
screen.
6. Once the hard disk is formatted, you can shut down the media player using the
remote control. Use the remote control to start the media player again.
7. Navigate to ‘Setup’ and press the ‘OK’ button.
8. Navigate to ‘System’.
9. Select ‘System Info’ and press the ‘OK’ button. If correct, the notification
‘Running’ appears behind ‘Samba Server’.
10. You have successfully activated the Samba server.
