Bedienungsanleitung Emmeti X-Evo - XX 17X3E R32 Outdoor unit (Seite 10 von 40) (Englisch)

667121

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

GBGB

4. HANDLING AND TRANSPORT

5. UNITS POSITIONING

To move the units please use the relevant pre-cut handles placed on the

short sides of the packaging and comply with the current laws concerning

safety on the working place of the installation.

The external unit and the internal units of big size have to be moved by

two persons.

Pre-cut handles

Package of the internal unit

External unit package

Pre-cut handles

Unpacking operations have to be done carefully because the external

part of the units has not to be damaged when knifes or cutters are used

to open the carton package.

After unpacking make sure of the unit integrity.

If in doubt, do not use the unit and refer to the authorized technical

personnel

Attention!

Please verify that the two units of the air conditioner do not have been damaged during the transport

When a complaint is necessary, please get in touch with the carrier to make immediately sure about the damage and relevant responsibilities

Before throwing away the packages, make sure that all accessories supplied have been removed from them.

f) In kitchens with a lot of oil fumes and with high humidity percentage

g) Near machines issuing electromagnetic waves

h) Places with acid or alkaline fumes

TV, radio, acoustic equipment have to remain at a minimum distance of

1 m from the internal unit, the external unit, the power supply cables,

pipes; otherwise images could result not clear and some noise could be

detected.

Air conditioner has to be placed in a well-ventilated and easy to reach place.

Air conditioner has not to be placed in the following places:

a) Places where there are machines oils or other oils fumes.

b) Along the coast with high salt concentration in the air

c) Near resurgences with high content of sulphuric gases

d) In areas with high tension fluctuation, e.g. factories etc.

e) In vehicles or boats

5.1 Positioning the outdoor unit

If possible, avoid exposing the unit to direct

sunlight, particularly in early afternoon.

On the contrary, provide for a suitable protection

that does not obstruct the free circulation of air.

Avoid positioning in correspondence with areas

that can worsen the negative effects of atmo-

spheric agents such as eaves drains or downpipe

drains.

Select the position that is favourable for air

circulation and facilitates the drain of the con-

densation water.

In the models pay particular attention to snowfall,

including snow falling from roof pitches which

could obstruct air circulation.

Select a position in which noise and the air jet do

not damage or bother people, animals or plants.

Make sure the “minimum operational distances”

are observed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Emmeti X-Evo - XX 17X3E R32 Outdoor unit Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Emmeti X-Evo - XX 17X3E R32 Outdoor unit

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info