Bedienungsanleitung EMOS SELECT 9001 (Seite 7 von 92) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

784684

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

Alarm Settings

2 alarms can be set on the weather station.

1. Short-press the button twice.

2. Press the button for 3 seconds and use the arrows to set the alarm hour and minute.

3. Conrm the set value by pressing ; holding the arrow keys speeds up settings.

Alarm Activation/Deactivation/Snooze

Repeatedly pressing the button activates alarm 1 (AL1); alarm 2 (AL2); or both alarms at the same

time (AL1, AL2); or deactivates the alarms.

You can postpone (snooze) the alarm by 5 minutes by pressing the button. After pressing, the

icons will start ashing.

Turn o the alarm by pressing . After pressing, the icons will stop ashing

and only will remain on the screen. The alarm will activate again the next day.

Setting Altitude and Atmospheric Pressure

The station shows atmospheric pressure in hPa or inHg and keeps a history of pressure readings

for the last 12 hours.

To achieve more accurate calculation of pressure values, it is advised to manually set the altitude

for the place where the weather station is being used.

1. Short-press the button three times.

2. Press the button for 3 seconds and use the arrows to set altitude between -90 m to +1,990m

(10 m increments).

3. Pressing the button switches between M/hpa and Ft/inHg units.

4. Short-press the button to quit settings.

Setting Unit of Precipitation

1. Press the button ve times, then press the button for 3 seconds.

2. Use the and arrows to set mm or inches as units.

3. Short-press the button to quit settings.

Setting Unit of Wind Speed

1. Press the button six times, then press the button for 3 seconds.

2. Use the and arrows to set km/h or mph as units.

3. Short-press the button to quit settings.

Setting Temperature Limits for Maximum and Minimum Temperature

Temperature limits can be set independently for up to 3 outdoor temperature sensors.

When minimum or maximum temperature limit is activated, the (min) or (max) icon will

appear on the screen and disappear after deactivation.

Temperature limit ranges

Outdoor Indoor

Minimum -30°C to +10°C 0°C to 23°C

Maximum 28°C to +60°C 26°C to 50°C

Resolution 0.5°C 0.5°C

While on the main screen, repeatedly press the button to switch to sensor 1, 2 or 3 and proceed

for each sensor as follows.

1. Short-press the button four times.

2. Press the button for 3 seconds and set the minimum outdoor temperature.

3. Short-press the button and activate (ON)/deactivate (OFF) the outdoor minimum temper-

ature alert.

4. Short-press the button and set the minimum outdoor temperature.

5. Short-press the button and activate (ON)/deactivate (OFF) the outdoor maximum temper-

ature alert.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

EMOS SELECT 9001 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info