682497
5
Zoom out
Zoom in
Vorherige Seite
1/35
Nächste Seite
Dress Maker 120A
INSTRUCTION MANUAL
FREE ARM SEWING MACHINE
your creative assistant
1
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic safety precautions should
always be followed, including the following:
Read all instructions before using your household sewing
machine.
DANGER-To reduce the risk of electric shock:
Your household sewing machine should never be left unattended when
plugged in. Always unplug your machine from the electric outlet
immediately after using and before cleaning.
Change the light bulb only with the same type of bulb. Use a bulb 15W.
WARNING-to reduce: the risk of burns, fire, electric shock or injury
to persons
- Do not allow to be used as a toy. Close attention is necessary when
this sewing machine is used by or near children.
- Use this machine only for its intended use as described in this manual.
- Never operate this sewing machine if it has a damaged cord or plug, if
it is not working properly, if it has been dropped or damaged or
dropped into water. Return the sewing machine to the nearest
authorized dealer or service center for examination, repair, electrical or
mechanical adjustment.
- The supply cord cannot be replaced. If the supply cord connected with
foot controller is damaged the foot controller shall be scrapped.
- Never operate the sewing machine with any air openings blocked.
Keep ventilation openings of the sewing machine and foot controller
free from the accumulation of lint, dust and cloth.
- Never drop or insert any object into the opening.
- Do not use outdoors.
- Do not operate where aerosol (spray) products are being used or
where oxygen is being administered.
- Do not put anything on the foot controller because the machine may
accidentally start and the motor or the foot controller may overheat.
- To disconnect turn all controls to the off position, then remove plug
from outlet.
- Do not unplug by pulling on cord. To unplug, hold the plug, not the
cord.
- Keep fingers away from all moving parts. Special care is required
around the sewing needle.
2
- Always use the proper needle plate. The wrong plate can cause the
needle to break.
- Do not use bent needles.
- Do not pull or push fabric while stitching. It may deflect the needle.
- Switch the machine off when making any adjustments in the needle
area, such as threading needle, changing needle or changing presser
foot and the like.
- Always unplug the sewing machine from the electric outlet when
making any user servicing mentioned in the instruction manual.
- Use only identical replacement parts.
- This appliance can be used by children aged from 8 years and above
and persons with
reduced physical, sensory or mental capabilities or lack of experience
and knowledge if they
have been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
- Children shall not play with the appliance.
- Cleaning and user maintenance shall not be made by children without
supervision.
- Keep the instruction at a suitable place that close to the machine, and
hand it over if you give the machine to a third party.
- Dont use the machine if its wet or in humid environment.
- Always unplug the machine if you leave it unattended, to avoid injury
by expediently switch on the machine.
SAVE THESE INSTRUCTIONS
Warning
When working close to the needle be very careful not to prick your
fingers. When you use the machine for the first time, put a piece of cloth
under the presser foot und run the machine without thread for some
minutes. Dry any oil spots which may appear.
Please use for your sewing machine the ZHEJIANG FOUNDER presser
foot, type KD-2902.
Power rating: 220 - 240V ~ , 50/60Hz
Current rating: 1.0A
Protection Class : II
3
CONTENTS
Name of parts ............................................................................................ 4-5
Accessories ................................................................................................... 6
Before sewing (Power supply and sewing lamp) .......................................... 7
Removing extension table ............................................................................. 8
Free-arm sewing ........................................................................................... 8
Winding the bobbin ....................................................................................... 9
Removing bobbin case and bobbin ............................................................. 10
Inserting bobbin into bobbin case ............................................................... 10
Inserting bobbin case into shuttle race ....................................................... 11
Threading upper thread & Twin needle threading ....................................... 12
Drawing up the bobbin thread ..................................................................... 13
Changing sewing directions ........................................................................ 13
Leveling the machine .............................................................................. 14
Adjusting thread tension ............................................................................. 15
Changing needle ......................................................................................... 16
Insert “darning plate“ ................................................................................... 16
Fabric-Thread-Needle-table ........................................................................ 17
Sewing (pattern selector) and operation table ............................................ 18
To start sewing ............................................................................................ 19
How to finish stitches .................................................................................. 20
Straight stitch .............................................................................................. 21
Zigzag sewing ............................................................................................. 21
Automatic embroidery ................................................................................. 21
Blind stitch .............................................................................................. 22-23
Button sewing ............................................................................................. 24
Binding ........................................................................................................ 24
Overcasting ................................................................................................. 24
Zipper sewing .............................................................................................. 25
Buttonhole sewing ....................................................................................... 26
Hemming ..................................................................................................... 27
Twin needle ................................................................................................. 28
Embroidery .................................................................................................. 28
Quilter ......................................................................................................... 29
Seam guide ................................................................................................. 29
Maintenance (Cleaning and oiling) ............................................................. 30
Checking performance problems-Troubleshooting ................................... 31
4
NAME OF PARTS (FRONT VIEW)
1. Thread tension dial
2. Pattern selector dial
3. Bobbin winder stopper
4. Reverse button
5. Thread guide and needle clamp
6. Shuttle cover
7. Extension table
8. Presser foot
9. Thread cutter
10. Face cover
11. Take up lever
12. Upper thread guide
2
7
6
8
1
10
11
12
9
5
NAME OF PARTS (REAR VIEW)
1. Thumb screw
2. Needle plate
3. Presser foot lever
4. Spool pin (B) (Optional)
5. Clutch button
6. Hand wheel
7. Spool pin (A)
8. Bobbin winder spindle
5
3
1
2
8
7
4
6
10
REMOVING BOBBIN CASE AND BOBBIN
1. Raise the needle to its highest
position and open shuttle race cover.
3. Release the latch and the bobbin will fall out
easily.
INSERTING BOBBIN INTO BOBBIN CASE
1. Pull 5 cm of thread from bobbin and
insert it into bobbin case as shown.
3. Pull the thread through the slot and under the
tension spring and draw out about 10 cm of
thread.
2. Open the hinged latch of the bobbin
case and pull the bobbin case out of
the machine.
Schl
itz
Slot
Gle
uf
Inte
rtice
5 cm
2. Guide the end of thread into the slot.
Slot
Hinged latch
5 cm
10 cm
Tension spring
11
INSERTING BOBBIN CASE INTO SHUTTLE RACE
1. Raise the needle to its highest position. Pull the thread to the front, open the latch of
the bobbin case and hold it.
2. Holding the latch open, place bobbin case onto the center pin in the shuttle and
release latch.
Finger
Hinged latch
Insert
13
DRAWING UP THE BOBBIN THREAD
1. Hold the upper thread with left hand, turn the
hand wheel slowly towards you until the needle
goes down and comes up. Then stop the hand
wheel when the take up lever is at its highest
position.
Lightly draw up the upper thread, by which the
lower thread will be brought up in a loop.
2. Pull out both threads and place them together
under presser foot to the rear of the machine.
3. Place fabric under presser foot from the front,
lower presser foot.
4. Start to sew.
CHANGING SEWING DIRECTIONS
1. Lower needle down into fabric and
raise presser foot, pivot the fabric
around the needle to change direction
as desired.
LEVELING THE MACHINE
2. Lower the presser foot and start to sew.
14
Down
Up
20
HOW TO FINISH STITCHES
1. Sew to the edge of seam.
2. Push the reverse button and sew in reverse for about 3-4 cms.
3. Raise needle to its highest position.
4. Lift the presser foot and pull the fabric out of the back of the machine.
5. Cut threads as shown on the thread cutter.
Thread cutter
21
STRAIGHT STITCH
1. This type of stitching is used most frequently.
2. The zigzag presser foot can be used for both straight and zigzag sewing.
ZIGZAG SEWING
Pattern selector position
Satin stitching can be used for sewing
initials, patterns, appliqué, etc.
The zigzag stitch is a universal stitch. The
satin stitch pattern has short tense stitches
which can be used for sewing.
AUTOMATIC EMBROIDERY
These stitches have a wide range of
decorative and utility applications and are
particularly suitable for woven fabrics.
The Scallop stitch (L) is ideal for edging
collars, cuffs, tablecloths, serviettes etc. For
all the stitches.
With satin stitch a paper backing, will
improve the result.
22
BLIND STITCH
1. Fold fabric as shown.
2. Finish the seam as shown.
23
Adjust the width to obtain the correct seam.
Wrong: Needle is not piercing edge
to fold at all.
Correct seam.
Needle pierces the edge of fold too
much.
5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Empisal Dressmaker 120A wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info