45
8.2.8 Other settings are given in the emergency call settings menu option
Note: in order to be able to configure the setting described here, you need the
phone code. This is preconfigured: 1234
– Emergency call numbers:
You can save, modify and delete emergency call numbers here.
Refer to chapter 8.1.2 »Saving the emergency numbers«
– Data server no.:
This data server service converts your position data in case of an
emergency and with manual enquiry into a valid address. You can enter
the number of an aid organisation (Line for data) or the number of an
address server here.
– Pre-alarm:
The pre-alarm is a loud warning tone that is played at the beginning of
the emergency call sequence, before the emergency number that has
been entered is called up. If the pre-alarm is set to Off, the emergency call
number is called up immediately. If the pre-alarm is set to On, you can enter
the duration of the pre-alarm in seconds.
Note: The pre-alarm is used in case of an emergency to be
noticed by persons located nearby. They can
provide assistance immediately.
– Emergency call tune: The emergency call tune can be switched on or off here.
With the emergency call tune switched off, the emergency call number
entered is called up immediately without a pre-alarm and without an
emergency call tune.
Note: Switching the emergency call tune off is meaningful only
if the emergency call button us not used to make an emergency call,
but, for example, as a speed dial key.
