Bedienungsanleitung Emtec H140 - EKCORC 4N1E (Seite 5 von 65) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Polnisch, Schwedisch)

499693

Zoom out

Zoom in

Vorherige Seite

1/65

Nächste Seite

4 in 1 Universal Remote Control EKCORC4n1E

General Security Note

Technical manipulations of the product or any changes to the product

are forbidden, because of security and approval issues.

Pleasetakecaretosetupthedevicecorrectly-consultyouruser

guide. Children should use the device only under adult supervision.

Avoid the following :

· strong mechanical wear and tear

· high temperature

· strong vibrations

· high humidity

Please also respect the additional security notes in the various user

guide chapters. For questions not covered from the user guide please

contact our technical hotline or another specialist.

To ensure correct set up please read the manual and security notes

carefully.

Battery change :

Thedevicemayonlybeusedwith2AAAAlkalinebatteries-never

try to connect to another power supply. When inserting batteries be

sure the right polarity is used. Remove the batteries when the device is

notusedforalongerperiod.Makesurethatthebatteriesarenotshort

circuitedandarenotdisposedinre(dangerofexplosion)

Batteries do not belong in children hands. Don’t let batteries lay

around openly - they might be swallowed by children or animals. If

this happens see a doctor immediately.

Leakingordamagedbatteriescanuponcontactwithskincausebur-

ning or acid damage - if necessary use suitable gloves

Please dispose of batteries in accordance with local bylaws

4 in 1Universal Remote Control EKCORC4n1E

Contents

1) Introduction

2) Put in the batteries

3)Functionsofthekey

4) Programming of the TV, VCR, DVD and SAT mode

5) Manual code search

6) Automatic code search

7) Brand search

8) Identifying codes found

9) Default Volume Control for satellite

10) Troubleshooting

1) Introduction

The 4 in 1 Universal Remote Control is designed to control up to 4

devices (TV, VCR, DVD, SAT). The 4 in 1 Universal Remote Control

contains a library of codes that are pre-programmed into the remote

control. This library covers nearly all the audio video products on the

markettoday.

2)Putinthebatteries(alwaysuseNEWAAAalkalinebatteries)

1.Openthecoveronthebackofthe4in1UniversalRemoteControl.

2.Insert2AAAalkalinebatteries,verifythattheyareplacedcorrectly

withthe+onthebatteryinthesamepositionasmarkedinsidethe

battery compartment.

3)Functionsofthekeys

[1]LEDindicator:Theindicatorlightasheswhentheremoteisope-

rating or lights continuously while you are programming the remote.

[2] POWER: Allows you to switch off the last selected appliance.

[3]TV,VCR,DVD,SAT:Thesekeysallowyoutoselecttheappliance

you wish to control.

[4]SETUP:Allowsyoutoprogramyourremotebeforetherstuse.

[5] SHIFT: Allows you to access secondary functions such as Menu,

Exit,etc…PressandreleasetheShiftkey,theLEDwillstayonindi-

catingtheShiftmode,pressthenthefunctionkeysyouwant.Pressing

andreleasingtheShiftkeywilltoggletheremotebacktonormal

operation.IfnokeyispressedaftertheShiftkeytheremotewilltime-

out to normal (non-shifted) operation after 15-20 seconds.

[6] INFO: Displays information of the selected appliance.

[7]PROG+/-:

TV, VCR or SAT mode: select the next or the previous channel.

DVD mode: select the next or previous chapter.

 SHIFT+PROG+/-:menunavigationkeys,allowyoutonavigate

up and down into the menu of your appliances.

[8]Volume+/-:Allowsyoutocontrolthevolume.Youcancontrolthe

volume of your TV even when you are in VCR, DVD or SAT mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Emtec H140 - EKCORC 4N1E Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info