Bedienungsanleitung Energetics PR 14.9 HRC (Seite 5 von 60) (Englisch)

633563

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

IMPORTANT INFORMATION

SAFETY KEY

The safety key must be inserted into the slot on the console and pushed all the way up in order to operate the tread-

mill. Always insert the safety key and attach the clip to your clothing at your waist before beginning your workout. If

you should encounter problems and need to stop the motor quickly, simply pull down the safety key to shut down

the power. To continue the operation, please turn oﬀ the power switch, wait a few seconds and switch it on again,

insert the safety key and push it up to the end.

ENGLISH / METRIC CONVERSION

The treadmill computer display can show METRIC and ENGLISH information. This should be preset for your area by the

factory. However, in case the treadmill needs to be converted between METRIC and ENGLISH readout, please follow

the procedure below:

Set the POWER SWITCH to ON. Press the START button on the computer and hold it. Insert the SAFETY KEY then re-

lease the START button. The computer will sound one short beep. Press the START button to switch between ENGLISH

and METRIC and press STOP button to conﬁrm the setting. The computer will sound a long beep and will return to the

POWER ON mode with the new setting.

POWER ON

Set the POWER SWITCH, located on the base frame, to ON and insert the SAFETY KEY. All LED windows light up with

a short beep sound. If no further button inputs are made within 4 minutes, the computer will enter the SLEEP MODE.

Press any button to return to the POWER ON mode.

SLEEP / DISPLAY MODE

When the power is ON the computer will automatically enter SLEEP MODE if it is left idle for 4 minutes without receiv-

ing any input. Press any button to return to POWER ON status when the computer is in the SLEEP MODE.

If you don’t want to use SLEEP MODE, and wonder to get always light up status (DISPLAY MODE) on the screen, then

please consult the following procedure. Firstly, pull out the safety key, furthermore press and hold the SPEED UP and

DOWN buttons, insert the safety key to power on the treadmill. The computer will reply a short beep sound and

shows “1” on the display, press “START” button to enter this setting program, and press the INCLINE UP and DOWN but-

tons to switch between “ON” (SLEEP MODE features on) and “OFF” (SLEEP MODE features oﬀ) in following step. Finally,

please presses STOP/ENTER two times to save this setting and return to POWER ON mode.

STOP / ENTER

When the treadmill is running, press the STOP button to pause the treadmill at any time. All ﬁgures on the displayed

on the LED will freeze; furthermore the display shows “PAUSE”. Press START to resume the program and all displays will

continue the performance until the program ﬁnishes. If you continue pressing the STOP twice, then all data will return

to 0 and the treadmill will return to POWER ON status. If there is no action within 4 minutes, the treadmill will return to

POWER ON status.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Energetics PR 14.9 HRC Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Energetics PR 14.9 HRC

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info