1. Align the hole in the end of the Connecting
Arms (L&R)(8&9)(pivoting rod end) with the
hole in the bracket of the Handle Bars
(L&R)(10&11). The rod end should be inside
of the Handle Bars (L&R)(10&11) bracket.
Take 2pcs of 5/16" x 1-1/4" Hex Head Bolts
(79) and install it through the Handle Bar
(L&R)(10&11) bracket and the rod end.
Install 2pcs of 5/16" x 20 x 1.5T Flat Washers
(155), 5/16" x 7T Nyloc Nuts (91) and Fish-
eye Sleeve (22) on the 5/16" x 1-1/4" Hex
Head Bolt (79) and tighten firmly by using
12m/m Wrench (129) and 13/14 m/m
Wrench (124) on the 5/16" x 7T Nyloc Nut
(91) and on the 5/16" x 1-1/4"
Hex Head Bolt (79).
2. Match Connecting Arm Cover
B (R)(163), with Connecting
Arm Cover B (L)(164), for
both sides of connecting
arms and tighten
with 2pcs of
M5 x 15m/m Phillips Head
Screws (82) and 4pcs of
Ø3.5x12m/m Sheet Metal
Screws (107) by using Short
Phillips Head Screw Driver
(125)
3. Repeat step 1 for the Connecting
Arm (R)(9).
4. Match the Connecting Arm Cover
A (R) (161), with Connecting Arm
Cover A (L) (162), onto the Handle
Bar (L) (10) and secure the covers with 2pcs of M5 x 15m/m Phillips Head Screws (82) and 2pcs of
Ø3.5x12m/m Sheet Metal Screws (107) by using the Phillips Head Screw Driver(126).
5. Repeat step 3 for the Handle Bar (R) (11).
6. Install the 2pcs of Sliding Wheel Cover (64) above the Slide Wheel, Urethane (47) and Pedal Arm (L,
R)(6,7) with the 4pcs of M5x12m/m Phillips Head Screws (82) and tighten them by using Phillips Head
Screw Driver (126).
7. Install the Rear Cover (A) (60), on the Rear Stabilizer of the Main Frame (1), with the openings facing
backward, and tighten the 2pcs of M5x15m/m Phillips Head Screws (82) by using the Phillips Head Screw
Driver (126).
8. Install the Rear Shroud (B) (61), above the Rail Assembly (2), with the openings facing the Rear Shroud
(A) (60), and guide the Sliding Wheel (47) into the Rear Shroud (B) (61).
9. Match the openings of Rear Shroud (B) (61), with Rail Assembly Cover (A) (60) and secure both covers
with 2pcs of 5x16m/m Tapping Screws (109) by using Philips Head Screw Driver (126). Secure the Rear
Shroud (B) (61), at the rear end with 2pcs of M5 x 50m/m Philips Head Screws (123).
