Bedienungsanleitung Engenius DuraFon PRO (Seite 32 von 38) (Englisch)

729077

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

e-2. Press 2 to change the name of line, when calls coming, it will indicate the

calls came from which line.

i. Use or to move the cursor backward or forward to insert (to the

left of the cursor) or delete (the character above the cursor, or left of the

cursor if cursor is on the right of the last character).

ii. Enter characters using the Character Table and method discussed in the

Phonebook section.

iii. When finished, press SAVE (Left) soft key to save change.

f. Press 6 to change LCD display contrast:

i. Use or to scroll through values 1 to 8. Pick one that is most

suitable to you. Default = 6.

ii. Press SAVE (Left) soft key to save setting.

g. Press 7 to change the LCD backlight:

i. Use or to scroll through options: On, Off, and 20 Seconds.

Default = 20 seconds, meaning that the backlight on, will turn off after 20

seconds of inactivity.

ii. Press SAVE (Left) soft key to save setting.

h. Press 8 to change the Line selection:

i. Use or to scroll through options: On or Off. Default = Off,

meaning that you can not select the other available lines to dial.

ii. Press SAVE (Left) soft key to save setting.

i. Press 9 to change the PBX options:

i. Press ADD soft key to edit a PBX feature to be memorized and key in the

name of the PBX features just like editing a phonebook entry.

ii. Press SAVE (Left) soft key to save setting.

iii. Press OPTION and 1 following by entering PBX options mode, you can erase

the PBX option.

iv. Press OPTION and 2 following by entering PBX options mode, you can edit

the PBX option.

v. Press OPTION and 3 following by entering PBX options mode, you can

transfer the PBX options to other handset(s).

Re: To transfer PBX Options, both parties have to enter the PBX Option mode

firstly by following below:

For sending party, press 1 to enter sending mode.

 Either press TX ALL(left soft key) to transfer all PBX options to another

handset(s).

 Or press TX ONE (right soft key) to transfer a specific entry to another

handset(s).

 Press 2-digit handset ID or group ID, then select all PBX options or a

specific entry to be transferred(“00” means all handsets)

 During PBX options transferring, LCD shows “Sending”, and 2-digit

countdown on the LCD to indicate the numbers of PBX options which

are waiting for sending.

For receiving party, press 2 to enter receiving mode.

 When entering the receiving mode, LCD shows “Ready”.

 Start to receive PBX options, LCD shows “Get PBX options from Ext. # :

x ㎜ x”.

 When the PBX options is receiving, 2-digit countdown on the LCD

indicates the number of PBX options which are waiting to be received.

j. Press 0 to change Language:

i. Use or to scroll through options: English, Spanish and French.

Default = English, meaning the LCD display shows in English.

ii. Press SAVE (Left) soft key to save setting.

K. Press # to turn Broadcast On/Off.

i. Press On (Left soft key) to turn on the broadcast function (including the

broadcast of handset to handset and base to handset).

ii. Press Off(Left soft key) to turn off the broadcast function

Re: When broadcast setting “Off”, there is an icon indicated in the display, side

of the battery icon.

L. Press * to turn Name Tag On/Off.

i. Press On (Left soft key) to turn on the name tag function, when receiving the

incoming calls, the LCD will show the name which stored in phonebook.

ii. Press Off(Left soft key) to turn off the name tag function.

7. Press 6 to register or de-register handset: See Handset Registration.

8. Press 7 to set up the intercom or broadcast via repeater(see Repeater Setup).

Note:

1. Different PBX makers use different analog codes to control PBX

function, like call transfer, call park, etc.; Please refer to your PBX

maker’s manual for this information.

2. Errors may occur in PBX options and phonebook entries transferred

wirelessly due to interference. Please re-enter entry manually if

problems occur with an entry.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Engenius DuraFon PRO Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info