Bedienungsanleitung Engenius DuraFon-SIP System (Seite 37 von 39) (Englisch)

729078

Zoom out

Zoom in

Vorherige Seite

1/39

Nächste Seite

Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an

uncontrolled environment. This equipment should be installed and operated with

minimum distance 20cm between the radiator & your body.

This device has been designed to operate with an antenna having a maximum gain

of 2dBi. Antenna having a higher gain is strictly prohibited per regulations of

Industry Canada. The required antenna impedance is 50 ohms.

Déclaration d'exposition aux radiations:

Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies

pour un environnement non contrôlé. Cet équipement doit être installé et utilisé

avec un minimum de 20cm de distance entre la source de rayonnement et votre

corps.

Ce dispositif a été conçu pour fonctionner avec une antenne ayant un gain maximal

de dB 2. Une antenne à gain plus élevé est strictement interdite par les règlements

d'Industrie Canada. L'impédance d'antenne requise est de 50 ohms.

Telecom

This equipment complies with Part 68 of the FCC rules and the requirements

adopted by the ACTA. On the EUT of this equipment is a label that contains, among

other information, a product identifier in the format US: SNIW401BSP935. If

requested, this number must be provided to the telephone company.

The REN is used to determine the number of devices that may be connected

to a telephone line. Excessive RENs on a telephone line may result in the devices

not ringing in response to an incoming call. In most but not all areas, the sum of

RENs should not exceed five (5.0). To be certain of the number of devices that may

be connected to a line, as determined by the total RENs, contact the local telephone

company. For products approved after July 23, 2001, the REN for this product is part

of the product identifier that has the format US: SNIW401BSP935. The digits

represented by 01 are the REN without a decimal point (e.g., 03 is a REN of 0.3). For

earlier products, the REN is separately shown on the label.

If your equipment causes harm to the telephone network, the telephone

company may discontinue your service temporarily. If possible, they will notify you

in advance. But if advance notice is not practical, you will be notified as soon as

possible. You will be informed of your right to file a complaint with the FCC. Your

telephone company may make changes in its facilities, equipment, operations or

procedures that could affect the proper functioning of your equipment. If they do,

you will be notified in advance to give you an opportunity to maintain

uninterrupted telephone service.

If you experience trouble with this telephone equipment, please contact the

following address and phone number for information on obtaining service or repairs.

The telephone company may ask that you disconnect this equipment from the

network until the problem has been corrected or until you are sure that the

equipment is not malfunctioning.

This equipment may not be used on coin service provided by the telephone

company. Connection to party lines is subject to state tariffs.

Company: EnGenius Technologies

Address: 1580 Scenic Avenue, Costa Mesa, CA 92626

Tel no.: 888.735.7888 ext. 827

A plug and jack used to connect this equipment to the premises wiring and

telephone network must comply with the applicable FCC Part 68 rules and

requirements adopted by the ACTA. A compliant telephone cord and modular plug

is provided with this product. It is designed to be connected to a compatible

modular jack that is also compliant. See installation instructions for details.

''NOTICE: This equipment meets the applicable Industry Canada Terminal

Equipment Technical Specifications. This is confirmed by the registration number.

The abbreviation, IC, before the registration number signifies that registration was

performed based on a Declaration of Conformity indicating that Industry Canada

technical specifications were met. It does not imply that Industry Canada approved

the equipment.”

''NOTICE: The Ringer Equivalence Number (REN) for this terminal equipment is 0.1.

The REN assigned to each terminal equipment provides an indication of the

maximum number of terminals allowed to be connected to a telephone interface.

The termination on an interface may consist of any combination of devices subject

only to the requirement that the sum of the Ringer Equivalence Numbers of all the

devices does not exceed five.''

« AVIS : Le présent matériel est conforme aux spécifications techniques d’Industrie

Canadaapplicables au matériel terminal. Cette conformité est confirmée par le

numérod'enregistrement. Le sigle IC, placé devant le numéro d'enregistrement,

signifie quel’enregistrement s’est effectué conformément à une déclaration de

conformité et indique queles spécifications techniques d'Industrie Canada ont été

respectées. Il n’implique pasqu’Industrie Canada a approuvé le matériel. »

« AVIS : L'indice d'équivalence de la sonnerie (IES) du présent matériel est de 0.1.

L'IESassigné à chaque dispositif terminal indique le nombre maximal de terminaux

qui peuvent êtreraccordés à une interface téléphonique. La terminaison d'une

interface peut consister en unecombinaison quelconque de dispositifs, à la seule

Engenius DuraFon-SIP System Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info