Bedienungsanleitung Engenius DuraFon USL (Seite 7 von 35) (Englisch)

729081

Zoom out

Zoom in

Vorherige Seite

1/35

Nächste Seite

Handset Features

Basic Handset Features

line LCD (Liquid Crystal Display)

The LCD

display has LED (Light Emitting Diode) for backlighting.

The 1

line of LCD consists of icons

Icons explanation from left to right

(1)

RSSI (Receive Signal Strength Indicator)

During a call, the number of bars is proportional to the radio signal

strength received.

(2) Call in-progress (ON/OFF-Hook)

Indicates if phone line mode is active

(3)

Intercom in-progress

Indicates if Intercom mode is active

(4)

Handset ID

Display

s a handset icon and a 2

digit Handset ID

(5)

Channel number in Walkie

Indicates the Channel (1~5) selected

(6)

Two-Digit Address Index

Shows address index when viewing contents of the call logs.

(7)

Line Indicator

Indicates the number

of the

line being accessed by the handset.

(8)

Speaker phone

Indicates if speaker phone is active

(9)

Battery Strength

 Number of bars is proportional to the amount of battery time

remaining.



Indicates charging when in charger cradle.

d. The 2

and 3

lines of the LCD, maximum 14 characters each, display

status, message, menu selections, or user

editable alphanumerical

DuraFon PRO

REDIAL MENU

(1)

(2)

(3)

(4)

(5)

(6,7)

(8)

(9)

b,c

characters

The

last line displays the left and right soft keys.

Ringer

Rings to an incoming call.

Distinctive alert sounds indicating various events:

(1)

Single Beep: successful key entry

(2) Double beep: failed operation or invalid key entry, also indicates

power on/off

(3)

Periodic 1

Long

Short Beep (every 1 minute): low battery warning

(4) Periodic Long Series of Beeps (repeat every 30 seconds): indicates a

call is on

hold

TALK/FLASH ( )

Places or answers a

telephone or intercom call

b. Sends a Flash signal to phone line to retrieve a dial tone after the call ends,

or to perform the call waiting feature provided by local phone companies

during a call.

Press and hold the key for o

ne second to enable/disable speakerphone.

SPEAKERPHONE ( )

a Press the key to enable/disable the speakerphone during incoming,

outgoing or intercom call.

b. During IDLE mode, press and hold the key to activate/deactivate

Monitoring

2-WAY INTERCOM ( )

Places an intercom call to another handset ID or a group ID

(

group paging

b. Intercom calls are digital, full duplex, and are conducted without the

assistance from the

base.

6. PTT

Activate the h

alf duplex broadcast

ing

via

UHF

band

or 900MHz band

Press the Mode key repeatedly to set the desired

channel

(1~5) in advance.

Re.

PTT operation should be limited to 50% duty cycle.

Left/Right Soft Keys(

)

Make menu selection.

8. Up( ) /Down( ) Scrolling Keys

Scroll through records and menu selections.

Adjust receiver voice volume when in Talk mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Engenius DuraFon USL Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info