19
User Power Limit: Set the maximum amount of power that
can be delivered by a port.
Note: The User Power Limit can only be implemented
whentheClassvalueissettoUser-Dened.
State:
• Enable – Enable the Device Discovery protocol and provides
power to the device using the PoE module. The Device Discovery
Protocol enables the device to discover Powered Devices attached to
thedeviceinterfacesandtolearntheirclassication.
• Disable – Disables the Device Discovery protocol and stops the
power supply to the device using the PoE module.
Status: Shows the port’s PoE status. The possible eld
values are:
• Delivering Power – The device is enabled to deliver power
via the port.
• Disabled – The device is disabled for delivering power via the port.
• Test Fail – The powered device test has failed. For example, a
port could not be enabled and cannot be used to deliver power to
the powered device.
• Testing – The powered device is being tested. For example, a
powereddeviceistestedtoconrmitisreceivingpowerfromthe
power supply.
• Searching –The device is currently searching for a powered
device. Searching is the default PoE operational status.
• Fault – The device has detected a fault on the powered device
when the port is forced on. For example, the power supply
voltage is out of range, or there is a communication error with PoE
devices, a short occurs, or an unknown error occurs.
Apply: Click APPLY to update the system settings.
