Bedienungsanleitung Engenius EP 801 (Seite 14 von 152) (Englisch)

458104

Zoom out

Zoom in

Vorherige Seite

1/152

Nächste Seite

~27~

Press again to hang up the call.

Making an 2-Way/ Intercom Call

The EP801 Cordless Phone System offers private, Intercom/ 2-way radio

calls independence of base station. Intercom/ 2-way communication can be

placed from or to base stations and handsets.

A. Handset to Handset Calls

Press key followed by a two-digit handset ID or

Group ID.

Press key to end the call.

Notes:

1. Intercom calls can be made regardless if the Base Station is

present.

2. If a Group ID is entered, the first handset (belonging to that

group) that answers will establish a link with the caller. See

Handset Group Subscription.

3. If a link cannot be established, the LCD shows “No

Connection” after a 12-second time out.

B. Intercom/2-Way from Base to Handset

Press key on the base station to intercom all registered

handsets. The first handset to answer will establish a voice link with the

base.

Or press a two-digit handset ID/group ID followed by key to

intercom the designated handset/ group.

The INTERCOM LED will flash until a handset responds.

4. The base unit will page for 30 seconds, then terminate the page if no

handset responds.

Before a handset answers, the INTERCOM can only be cancelled from

the base by pressing again. However, once a handset answers,

the base and the answering handset both can end the call.

~28~

C. Intercom/2-Way from Handset to Base

Press key followed by the left softkey --BASE

The base will ring, until press the key to connect

the intercom call with the handset.

Making a Broadcast

A. Handset to Handset Calls

Broadcasting all handsets

Press and hold key (left side of handset) from

one handset.

Hear bi-bi-beep while the initiating handset

broadcast to all handsets within communication

coverage.

Start to speak the message to be broadcasted once you hear the

“beep” sound; the speakerphone of destination handsets will be

opened up.

Release key to end the broadcasting.

Broadcasting a group of handsets

Enter the Group ID and then press and hold

key (left side of handset).

Hear bi-bi-beep while the initiating handset

broadcast all handsets within communication

coverage.

Start to speak the message to be broadcasted once you hear the

“beep” sound; the speakerphone of destination handsets will be

opened up.

Release key to end the broadcasting.

Broadcasting an individual handset

Enter the Handset ID and then press and hold

key (left side of handset).

Hear bi-bi-beep while the initiating handset

broadcast all handsets within communication

coverage.

Start to speak the message to be broadcasted once you hear the

“beep” sound; the speakerphone of destination handsets will be

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Engenius EP 801 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Engenius EP 801

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info