Bedienungsanleitung Engenius EP800 (Seite 9 von 351) (Englisch)

619916

Zoom out

Zoom in

Vorherige Seite

1/351

Nächste Seite

~17~

10.

Key-guard

a. When the keyguard is selected, all keys will be locked.

Press UNLOCK (Left) soft key followed by “＊” to release it.

b. The keyguard will be automatically enabled once returning back to

idle mode for 15 seconds.

11.

Dialing Prefix

a. Up to 14 digits, including pause(s), one access code can be pre-

programmed to be added automatically in front of the dialed number

when dialing from call logs, phonebook, and dial-and-send dialing.

12.

Call Hold

a. Places call on hold

13.

Mute

a. Press MUTE (Left) soft key during talk, the handset microphone will

be muted.

Press UNMUTE (Left) soft key to release it.

14.

Phonebook

a. 50 entries, each stores a phone number or handset ID (up to 26

digits) and name (up to16 characters)

b. Alphabetically sorted display and search by letter.

c. Dial from display.

d. During the stand-by mode, you can enter the phone book by

pressing scrolling key.

e. Phone book transfer via air

i. Transfer specific phonebook to one handset or all registered

handsets

ii. Transfer all phonebooks to one handset or all registered

handsets

15.

Key tone

a. Four-level key tone volume selections (Off/Low/Medium/High).

b. Four key tone type selections.

16.

Call Timers

a. Display call time duration for current call during and immediately

after the call.

17.

Programmable Feature Call

a. Allow user to pre-program the most frequently used Feature code

into EP800 which is adjunct to the PBX system.

~18~

Up to 10 entries can be saved.

Once the feature code is being programmed, you can quickly

perform those functions during the call by pressing OPTION soft key.

18.

Menu Display

a. To avoid mis-setup in the “Call Settings”(MENU-4), “Phone Settings”

(MENU-5), “Base Settings” (MENU-6) and Multi-base Setting

(MENU-7-3), these settings can be hidden.

b. Handset password is required before enter Menu Display (MENU-8),

the default handset password is “0000”.

c. When disabling the settings, these setting will not displayed any

longer, unless enabled by entering Menu Display again.

19.

PA On/Off

a. Enable or disable the broadcast function.

b. When PA is Off, the handset can’t receive broadcast from base

station or other registered handsets; But it can broadcast to base

station or other registered handsets.

20.

Group Setting

a. Allow handset to subscribe to one or several groups.

Re: Up to 9 groups (91~99) can be subscribed.

21.

Custom Name

a. Allow changing the “EP800” screen to the desired wording or info,

such as the user’s name.

Re: Up to 32 characters can be entered.

22.

Change Pwd

a. Allow changing the handset password which requires entering in Call

Barring (MENU-4-3) and Menu Display (MENU-8) .

Re:Default is “0000”.

23.

DTMF Duration

a. From MENU-6-1 to select variable duration of DTMF tone.

b. Default is 100ms.

c. When entering the Base Settings, PIN is required. Default is “0000”.

Re:

Better to check with your phone company first before changing it.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Engenius EP800 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Engenius EP800

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info