Bedienungsanleitung Engenius EP800 (Seite 25 von 351) (Englisch)

619916

Zoom out

Zoom in

Vorherige Seite

1/351

Nächste Seite

~49~

Call Manager

“Call Manager” feature allows two options：

1.One is the handset to be set to receive incoming calls or make outgoing

calls (2-way intercom, broadcast and transferred call are allowed). The

option is selectable by base station 1 to base station 4.

Re: “Call Manager” item will be hidden if Multi-Base function is disabled.

2.The other option is the handset to be set to access to available bases

automatically or manually.

For 1

option (Subscribe BS)：

Press MENU right soft key followed by 4 to enter the

Call Settings mode.

Press “6” to select Call Manager.

Re: “Call Manager” item available or selectable only if

Multi-Base function is enabled.

Press 1 to set Subscribe BS.

Re：When entering the submenu of Subscribe BS,

the LCD will show the available bases which

already subscribed.

Call Manager

1.Subscribe BS

SELECT BACK

Press or key to select the desired base station (#1~4), press

CHANGE left soft key to set the Subscribe BS ON/OFF.

4. If set the Subscribe BS ON, that means the handset is able to access

the line of the desired base station, so the handset is able to make

outgoing call or answer incoming call via the desired base station.

On the contrary, if set the Subscribe BS OFF, then the handset can’t

access the line of the desired base station, so the handset isn’t able to

make outgoing call or answer incoming call via the desired base station.

For 2

option (BS Selection)：

Press MENU right soft key followed by 4 to enter the

Call Settings mode.

Press “6” to select Call Manager.

~50~

Press “2” to set BS Selection.

Re：Default setting is “OFF”.

Call Manager

2.BS Selection

SELECT BACK

Press CHANGE left soft key to set the BS Selection ON/OFF.

Re：If BS Selection set “ON”, when pressing

key, the LCD will show the available bases (Lines),

i.e. 1, 2, 3, 4. Press digit “1”, you can access to base

1 to get the line.

Note：

：：

：When single base, no “Call Manager” setting in “Call Settings”.

Visual Message Waiting Indicator (VMWI)

VMWI feature supported the FSK message which received from telephone

line; It will activate a message icon of handset and flash the LED of base.

Notes:

1. A subscription to telephone company voice mail service is required.

2. If the handset still indicates the icon even after you have listened all messages,

turn it off by pressing and holding “Caller ID” key on the handset.

Adjust Handset Microphone Gain

In case you will use the handset in different workplace or environment, to

perform better voice quality for the other end, you can adjust the handset

microphone gain to suit for variable place.

Press MENU right soft key while the handset is in the standby

mode.

Press “5” (Phone Settings), followed by “1” to enter the “Mic. Gain”

menu.

Use or key to scroll the “Standard”, “Medium” and

“Low” options.

If you are using the handset in quiet environment, like office or

meeting room, the level of “Standard” is recommended.

If you are using the handset in a noisy environment, like factory or

outdoor place, the level of “Medium” or “Low” is recommended.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Engenius EP800 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Engenius EP800

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info