Bedienungsanleitung Engenius EP800 (Seite 1 von 2) (Englisch)

619916

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

Quick Installation Guide

EnGenius Europe | Veldzigt 28, 3454 PW De Meern,

Netherlands | 0900-WIFIABC | www.wiabc.com

Disclaimer: Information may be subject to changes without prior notication.

https://www.linkedin.com/company/engeniuseurope

https://plus.google.com/+EngeniusEuropeBVDeMeern

https://www.youtube.com/user/engeniuseuropebv

https://twitter.com/engeniuseu

EP800

Base station installation

1. Install base station antenna.

2. Plug the transformer end of the base station AC/

DC adaptor into a standard AC electrical power outlet,

plug the other end into the “DC In” jack on the back of

the base station.

3. Plug phone cord into the “LINE” Jack.

4. A standard telephone or answering machine can be

plugged into the adjacent receptacle on the bottom of

the base station marked TEL.

Handset and charger installation (Charger only for EP800H)

1. Plug the transformer end of the Charger AC/DC adaptor into a standard AC

electric power outlet, plug the other end into the “DC In” jack on the back of

the charger.

2. Install battery pack onto the handset.

3. Install handset antenna.

4. Place handset onto the charger front slot.

5. Fully charge the battery for three hours before use.

6. The phone system is now ready to perform basic functions such as making

and receiving phone calls and intercom calls. No base station or handset

programming is needed for basic operations.

Handset registration

1. Press MENU-7 to enter the registration mode.

2. Press and hold the base’s PAGE button for 3 seconds until the ‘In Use’- LED

(white color) lighting up and flashing, also the base station will emit prompt

sound to remind you the base station is in the registration mode.

3. Press handset key “1”, this completes the registration process. The base

station will assign a handset ID between 12 and 19 automatically. The assigned

ID will be displayed on the handset LCD, indicating successful registration.

Handset features

1. TALK/FLASH

a. Places or answers a telephone or intercom call.

b. Sends a flash signal to a phone line to retrieve a dial tone after the call

ends, or to perform the call waiting feature provided by local phone companies

during a call.

2. SPEAKERPHONE

Press and hold the key for over 2 second to enable/disable the speakerphone

during incoming, outgoing or intercom call.

3. 2-WAY INTERCOM

a. Places an intercom call to another handset, a group handset (group paging)

or all registered handsets.

b. Intercom calls are digital, full duplex, and are conducted without the

assistance from the base station.

4. BROADCAST

a. Half duplex broadcasting to handsets for immediate announcement.

b. Half duplex broadcasting to base stations.

Re-Press the key on the left top corner of handset to activate the

broadcast function.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Engenius EP800 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Engenius EP800

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info