Bedienungsanleitung Engenius EP800 (Seite 7 von 351) (Deutsch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch, Türkisch)

619916

Zoom out

Zoom in

Vorherige Seite

1/351

Nächste Seite

~13~

Handset Features

Basic Handset Features

4-line LCD (Liquid Crystal Display)

a. The LCD display has LED (Light Emitting Diode) for backlighting.

b. The 1

line of LCD consists of icons.

c. Icons explanation from left to right

(1)

RSSI level (Receive Signal Strength Indicator)

During a call, the number of bars is proportional

to the radio signal strength received.

(2)

Link mode

(2.1) Call in-progress (ON/OFF-Hook)

The number on the right side of phone symbol

indicates which the phone line of Base Station

is active if Multi-Base is on.

(2.2) Intercom in-progress

Indicates if Intercom mode is active

Indicate the Handset ID which is making intercom with.

(3)

Speech mode

(3.1) Speaker Indicator

Indicate if the speaker is active

(3.2) Headset mode

(4)

Sound and Indication

(4.1) Enable ringer

(4.2) Disable ringer

(4.3) Ringer and vibrate mode

(4.4) Vibrate mode

(4.5) Message waiting indicator

(5)

Disable PA

Indicate if the incoming broadcast is disabled.

(6)

Two-Digit Handset ID

Displays the 2-digit Handset ID of own.

(7)

Battery Strength

Number of bars is proportional to the amount of battery time remaining.

d. The 2

and 3

lines of the LCD, maximum 16 characters each,

display status, message, menu selections, or user-editable

alphanumerical characters.

e The last line displays the left and right soft keys.

~14~

2. Ringer

a. Rings to an incoming call and intercom call.

b. Distinctive alert sounds indicating various events:

(1) Single beep: successful key entry.

(2) Double beep: indicates power on/off.

(3) Triple beep: failed operation.

(4) Periodic 1-Long-2-Short beep (every 1 minute): low battery warning、

out of range、call on hold

Re:

No any beep for invalid key entry

TALK/FLASH ( )

a. Places or answers a telephone or intercom call

b. Sends a Flash signal to phone line to retrieve a dial tone after the call

ends, or to perform the call waiting feature provided by local phone

companies during a call.

SPEAKERPHONE ( )

Press and hold the key for over 2 second to enable/disable the

speakerphone during incoming, outgoing or intercom call.

2-WAY INTERCOM ( )

a. Places an intercom call to another handset, a group handset (group

paging) or all registered handsets.

b. Intercom calls are digital, full duplex, and are conducted without the

assistance from the base station.

BROADCAST ( )

a. Half duplex broadcasting to handsets for immediate announcement

b. Half duplex broadcasting to base stations

Re：Press the key on the left top corner of handset to activate

the broadcast function.

Left/Right Soft Keys (

)

a. Make menu selection.

Up( ) /Down( ) Scrolling Keys

a. Scroll through records and menu selections.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Engenius EP800 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Engenius EP800

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info