Bedienungsanleitung Engenius EP800 (Seite 28 von 351) (Deutsch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch, Türkisch)

619916

Zoom out

Zoom in

Vorherige Seite

1/351

Nächste Seite

~55~

b. Press 2 to set Any Key TALK:

Use CHANGE left soft key to select and confirm “On” or “Off".

Default is “Off”.

Re: When set “on”, press any key (except

and SILENT key) to

answer the incoming call.

c. Press 3 to set LCD Contrast:

(1)

Use or to scroll through option 1~8. Default is 6.

(2)

Press SAVE left soft key to confirm selection.

d. Press 4 to set LCD Backlight:

(1)

Use or to scroll through option 1~3 (1.8 seconds

2.On 3.Off ). Default is “8 seconds”.

(2)

Press SAVE left soft key to confirm selection.

e. Press 5 to set Name Tag:

(1)

Use CHANGE left soft key to select and confirm “On” or “Off".

Default is “Off”.

(2)

Press SAVE left soft key to confirm selection.

Re: When Set “On”, the handset match the caller ID with the phone

book entries; once matched, the LCD screen will display the name

or nickname instead of pure caller ID info (needs Call Waiting

with Caller ID service from local telephone company)

f. Press 6 to set Language:

(1)

Use or to scroll through option (English, Spanish,

French, Italian, German, Dutch, Polish, Czech, Hungary,

Romanian, Turkish).

Default is “English”.

(2)

Press SAVE (Left) soft key to confirm selection.

g. Press 7 to set Custom Name:

(1)

Enter characters using the Character Table and method

discussed in the Phonebook section.

(2)

Use or to move the cursor backward or forward to

insert (to the left of the cursor) or delete (the character above the

cursor, or left of the cursor if cursor is on the right of the last

~56~

character).

(3)

Press SAVE (Left) soft key to confirm setting.

Re:

Once entering the custom name, the greeting of LCD in standby

mode will be changed as the entering.

Defalut greeting is “EP800”.

h. Press 8 to Change Password:

(1)

Enter original password (4 digits) of handset then press OK left

soft key when enter this menu.

(2)

Enter new password (4 digits) then press SAVE left soft key to

confirm new password.

i. Press 9 to set Headset Ring: See Headset Ring operation on Page

51.

7. Press 6 to set Base Settings:

When enter this menu, you must enter Base PIN code first (4 digits).

Re: The PIN code is for Base Settings. Default is “0000”.

a. Press 1 to set DTMF Duration.

(1)

Enter the DTMF duration (90~200ms), press OK left soft key to

confirm the setting. Default is 100ms.

Re: Please check with your dealer before you change it. If the duration

not matches with PSTN or PBX setting, it may operate faultily.

b. Press 2 select flash key timing. Default is 600ms.

(1)

Use or to scroll through option 1~9 (100~900ms). Or

press digit key (1~9) directly.

(2)

Press SELECT left soft key to confirm selection.

Re: The default value (600 ms) works in most areas. Changing this

setting may cause Flash key not working. Change only when you

are certain of the new value would work.

Press 3 to set Assign Next HS

(1)

Enter 2-digit handset ID followed by pressing OK left soft key.

(2)

When register a new handset, the base will assign the specific

handset ID which assigned in advance to the new handset.

Press 4 to set Clear HS

(1)

Enter 2-digit handset ID followed by pressing OK left soft key.

(2)

The base will erase the handset ID from system.

Press 5 to Change PIN:

(1)

Enter the new Base PIN followed by OK left soft key.

Re: Default Base PIN is “0000”.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Engenius EP800 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Engenius EP800

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info