Bedienungsanleitung Engenius EP802 (Seite 27 von 346) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch, Türkisch)

620000

Zoom out

Zoom in

Vorherige Seite

1/346

Nächste Seite

~53~

1. Press MENU right soft key to enter menu mode while the phone is in

standby mode.

Re: You can either press or , followed by SELECT left soft key to

confirm the selected menu. Or Press the digit directly to confirm the

selected menu. For example, press MENU right soft key followed by 4

and 1 to select the Ring Volume.

Press 1 to select KeyGuard (see Key Guard operation on page 34 ).

Press 2 to add, delete, edit, view and edit the phonebook (see

Phonebook instruction on page 39

Press 3 to set Sounds settings:

Press 1 to select Ring Volume:

Two options for ring volume: Line (for incoming call) and Intercom (for

intercom call). Set each option respectively.

When setting each option, use

or to scroll through 6 options:

“Off”, “Low”, “Medium”, “High”, “Vibrate” and “Vibrate & High”. Press

SELECT left soft key to save selection. Default = Medium.

Press 2 to select Ring Tone:

Two options for ring tone: Line (ring tone for incoming call) and

Intercom (ringer for intercom call). Set each option respectively.

Use the or to scroll through 8 ringers, press SELECT left

soft key to save selection. Default = 1.

Press 3 to select Key Volume when a key is pressed:

Use

or to scroll through 4 options: Off, Low, Medium, and

High. Press SELECT left soft key to save selection. Default =

Medium.

Press 4 to select Key Tone:

Use the

or to scroll through 4 options: 1, 2, 3 and 4. Press

SELECT left soft key to save selection. Default = 1.

~54~

5. Press 4 to set Call Settings:

Press 1 to set Dial Prefix:

(1)

Press

or to turn on or off the dial prefix feature.

Default = Off.

(2) If “On” is selected, the handset is prompted to enter the prefix

number, up to 14 digits can be entered.

(3)

Use Delete right soft key to edit prefix number.

(4)

Press SAVE left soft key to confirm the selection.

(5) When this feature is turned on, the LCD will prompt the user

“Dial Prefix? Yes or No” on each outgoing phone call from call

logs, phonebook, and dial-and-send dialing, the current prefix is

also displayed.

Re: the prefix number will be added automatically in front of the

dialed number if press YES left soft key.

(6) This feature is useful for access code, calling card, and credit

card calls, etc.

Press 2 to Group Select: see Handset Group Subscription on page

Press 3 to set Call Barring: see Call Barring operation on Page 42.

Press 4 to set Feature Call: see Feature Call operation on Page 45.

Press 5 to set Baby Monitor: see Baby Monitor operation on Page

Press 6 to set Call Manager: see Call Manager operation on Page

Press 7 to set Area Code:

The area code setting allow calls within local and regional area codes

to be dialed without prefix.

(1) Set Local Area Code :

Press MENU-4-7-1 to set the LAC. Enter the local area code (3-

digit) then press SAVE left soft key to confirm selection.

(2) Set Country Area Code :

Press MENU-4-7-2 to set the country code. Enter the code (3-

digit) then press SAVE left soft key to confirm selection.

Press 5 to set Phone Settings:

Press 1 to set Mic Gain: See Mic Gain operation on Page 50.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Engenius EP802 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Engenius EP802

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info