Base Features
Basic Base Station Features
The antenna port has a normal thread connector; to remove antenna or
cable, turn counterclockwise; to install, turn clockwise. Improper
installation may damage the connector.
When using an outdoor antenna, locate the antenna (not the base station
itself) as high as possible for a clear transmission path.
Power (blue color): it indicates base station has power.
L1/L2 (white color): it indicates the active telephone line (line 1 or line 2).
Restores base station to factory settings
Reset button is intended to prevent accidental system reset.
All handsets (including administrator) and additional base(s) need to be re-
registered after a base station reset.
REG button for Registration and Page
Press and hold this REG button 3 seconds to enter registration mode.
To search a misplaced handset; press “REG” button, all registered handsets beep
for 30 seconds. Press “REG” again or any key on handset to stop.
Standard RJ-11C/CA-11A connector to plug in the telephone line
Connect to an external device for music on hold
Jack for firmware upgrade (Type-B USB connector)
Please consult with EnGenius Tech support about the firmware upgrade.
DC In: to plug in the power adaptor
