Bedienungsanleitung Enkho 149728.01 (Seite 23 von 44) (Englisch, Italienisch)

775278

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

WARRANTY

CORRECT DISPOSAL OF THIS PRODUCT

The appliance is guaranteed for three years from the date of delivery years from the date of

delivery, as shown by the date on the receipt/invoice.

In case of defect existing before purchase, the replacement is guaranteed. The warranty does not

cover those parts found to be faulty as a result of negligence or careless use. The warranty also

excludes all cases of improper use of the appliance or any instances of use of professional type.

The seller refuses to accept any liability for damage that may directly or indirectly be caused

to people, property or pets as a result of failure to abide by all instructions contained in this

manual. The symbol representing the crossed out trash can on the appliance indicates that

the product, at the end of its useful life, must be treated separately from domestic waste.

It must be taken to a recycling centre for electrical and electronic appliances or turned in

to the point of sale when purchasing a new, equivalent, appliance. Correct consignment of the

no-longer used appliance to a recycling centre for treatment and environmentally compatible

elimination avoids negative impact on the environment and public health, and makes possible

the recovery the materials that the product is made from. The user is responsible for taking the

appliance to the recycling centre at the end of its life. For more detailed information regarding

the available collection systems, contract the local refuse centre or the store where the product

was purchased. Anyone who leaves or throws away this appliance without taking it to a collection

centre for electrical-electronic waste, shall be punished by administrative fine as per applicable

law on illegal waste disposal.

Air leaking after vacuum and seal. • Wrinkles, crumbs, grease or liquids may cause leaks

along the seal. Reseal or use another bag.

• Make sure any content in the bag is not with sharp

edge which may lead to bag cracked and damaged.

Seal item with a new bag.

• Make sure the sealing strip is dry and clean.

• Check both sealing gaskets are clean and in proper

position.

• Leaks along the seal can be caused by wrinkles,

debris, crumbs, grease or liquids. Reopen bag, wipe

the top inside of the bag and smooth it out along

the sealing strip before resealing.

It doesn’t seal after vacuuming. • Make sure the foam seal gaskets on both the lid and

on the base around the vacuum chamber are clean

and undamaged.

• Seal properly, the open end of bag should be resting

entirely inside vacuum chamber area.

• Check sealing strip and the foam gasket beneath

the lid for debris and correct position.

Bag melts. Sealing strip may be overheat, it is necessary to lift the

lid and allow sealing strip to cool down for 25 minutes

before using again.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Enkho 149728.01 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info