656708
6
Zoom out
Zoom in
Vorherige Seite
1/16
Nächste Seite
4
25
7. Following the diagrammatic representation to insert the key
to product to fit properly. Press the key at the side of product
to pull out the product.
DIN BACKWORD INSTALLATION
Disassemble framework
8. Framework
9. Insert the loosing insert pin into the buttom hole of
framework and full it out to disassemble framework. (When
install framewoek, pls level the flute)
Fix the product on the installation rack of wireless equipment.
10. Choose screw hold on produxt which is the same as that
of installation rack, then screw on 2pcs of screw at the side of
products. Choose proper screw according to the screw hold
of the installation rack.
11. Screw
12. Factory wireless equipment installation rack.
13. Fender or bracket.
PBC (MENU) PLAY
In (VCD) mode, press this button then play the PBC and display will show whole menu in
disc, work with number button to choose song. when you are playing either song of the
PBC, and you want to stop to select another song, press the button to turn off.
Note:
1. This function can be worked by the remote control.
2. PBC is suitable for the SVCD and VCD 2.0 disc.
3. In PBC mode, you can not press number button only to choose song.
VCD program playing
In VCD mode, you can set playing sequence of songs by program play function. The
program playing operation steps are as follows:
In VCD mode, press ST/PROG button, display will show
Input the songs which you want to programmed by the number buttons on remote control.
For example: Program the first song, unput your desired song, for example, the sourth
song, and press number button 4 on the remote control. Program the second song, press
button move the cursor to 2_ _ _ _ , input your desired song, for,
example, the eighth song, press number button 8 on the remote control. Press button
to program play.
Back to the normal mode, press the ST/PROG button, then press button.
Note: This function can only be worked by the remote contrl.
PLAY
PROG
PROG
6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Eonon E1095 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info