Bedienungsanleitung Epson DLQ3500 (Seite 4 von 31) (Englisch)

19838

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

Default Settings (2/4)

EPSON DLQ-3500 Quick Guide

Page length for tractor

This setting allows you to set the page length

(in inches) for the continuous paper loaded

on the tractor.

Skip over perforation

This feature is available only when

continuous paper is selected as the paper

source. When you turn on this feature, the

printer provides a one-inch (25.4 mm)

margin between the last line printed on one

page and the first line printed on the next

page. Because most application program

margin settings override margin settings

from the control panel, you should use this

setting only if you cannot set your top and

bottom margins using your application.

Auto tear-off

When auto tear-off is on and you are using

continuous paper with the tractor, the

printer automatically advances the paper

perforation to the tear-off position, where

you can easily tear off the printed page(s).

When the printer receives data again, it

automatically moves the paper back to the

top-of-form position and starts printing, so

you can use all of the next page.

When auto tear-off is off and you are using

continuous paper with the tractor, you need

to move the perforation to the tear-off

position manually by pressing the Tear

Off/Special Paper button. See “Using the

tear-off function” for more information.

Auto line feed

When auto line feed is on, the printer

accompanies each carriage return (CR) code

received with a line feed (LF) code.

Print direction

You can select auto print direction,

bidirectional printing (Bi-D), or

unidirectional printing (Uni-D). Printing is

normally bidirectional; however,

unidirectional printing allows for precise

vertical printing alignment.

Software

When you select ESC/P2, the printer

operates in the EPSON ESC/P2 mode. When

you select IBM PPDS, the printer emulates an

IBM printer.

0 slash

Select the zero character with a slash

(this feature is on) or without a slash (0) (this

feature is off). The slash allows you to easily

distinguish between the uppercase letter

“O” and a zero.

High speed draft

When high speed draft is on, the printer

prints up to 550 cps (characters per second)

at 10 cpi (characters per inch). When it is off,

the printer prints 495 cps at 10 cpi.

I/F (interface) mode

The printer provides a slot for an optional

interface in addition to its built-in parallel

interface and USB interface. You can choose

Auto (automatic), Parallel, USB or Option

for the interface mode. When you select

Auto, the printer automatically selects the

interface that is receiving data, and uses that

interface until the end of the print job. The

Auto setting allows you to share the printer

among multiple computers without

changing the interface mode.

If only one computer is connected to the

printer, you can select Parallel, USB or

Option, depending on which interface your

computer uses.

()

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson DLQ3500 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson DLQ3500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info