Bedienungsanleitung Epson EB-109W (Seite 176 von 203) (Englisch)

675089

176

Zoom out

Zoom in

Vorherige Seite

1/203

Nächste Seite

Solving Projector or Remote Control Operation Problems

176

Check the solutions in these sections if you have problems operating the

projector or remote control.

gg Related Links

• "Solutions to Projector Power or Shut-Off Problems" p.176

• "Solutions to Problems with the Remote Control" p.176

• "Solutions to Password Problems" p.177

• "Solution When "The Battery that Saves Your Clock Settings is Running

Low" Message Appears" p.177

Solutions to Projector Power or Shut-Off Problems

If the projector does not turn on when you press the power button or it turns

off unexpectedly, try the following solutions:

• Make sure the power cord is securely connected to the projector and to a

working electrical outlet.

• The projector's buttons may be locked for security. Unlock the buttons in

the Control Panel Lock setting in the projector's Settings menu or use the

remote control to turn on the projector.

s Settings > Lock Setting > Control Panel Lock

• The power cord may be defective. Disconnect the cord and contact Epson

for help.

• If the projector's lamp turns off unexpectedly, it may have entered sleep

mode after a period of inactivity. Perform any operation to wake the

projector. To turn off sleep mode, select Off as the Sleep Mode setting in

the projector's ECO menu.

• If the projector's lamp turns off unexpectedly, the A/V mute timer may be

enabled. To turn off the A/V mute timer, select Off as the A/V Mute Timer

setting in the projector's ECO menu.

• If the projector's lamp turns off unexpectedly, the lens cover timer may be

enabled. To turn off the lens cover timer, select Off as the Lens Cover

Timer setting in the projector's ECO menu.

• If the projector's lamp turns off, the status indicator is flashing, and the

temp (temperature) indicator is lit, the projector has overheated and turned

off.

• If the power button on the remote control does not turn on the projector,

check its batteries and make sure at least one of the remote receivers are

available in the Remote Receiver setting in the projector's Settings menu.

• The cooling fans may run in standby status depending on the projector

settings. Also, when the projector wakes from standby status, the fans may

cause an unexpected noise. This is not a malfunction.

gg Related Links

• "Projector Setup Settings - ECO Menu" p.144

• "Projector Indicator Status" p.167

• "Projector Feature Settings - Settings Menu" p.129

• "Unlocking the Projector's Buttons" p.84

Solutions to Problems with the Remote Control

If the projector does not respond to remote control commands, try the

following solutions:

• Check that the remote control batteries are installed correctly and have

power. If necessary, replace the batteries.

• Make sure you are operating the remote control within the reception angle

and range of the projector.

• Make sure the projector is not warming up or shutting down.

• Check to see if a button on the remote control is stuck down, causing it to

enter sleep mode. Release the button to wake the remote control up.

• Strong fluorescent lighting, direct sunlight, or infrared device signals may be

interfering with the projector's remote receivers. Dim the lights or move the

projector away from the sun or interfering equipment.

• Make sure at least one of the remote receivers are available in the Remote

Receiver setting in the projector's Settings menu.

• If the Remote Receiver setting is disabled, hold down the [Menu] button on

the remote control for at least 15 seconds to reset the setting to its default.

• If you assigned an ID number to the projector to operate multiple projectors

from the remote control, you may need to check or change the ID setting.

• If you lose the remote control, you can order another one from Epson.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson EB-109W Seite 176

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson EB-109W

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info