500202
89
Zoom out
Zoom in
Vorherige Seite
1/146
Nächste Seite
s "Automatically Detect Input Signals and Change the Projected Image
(Source Search)" p.31
Submenu Function
Auto Setup
(Only available when an analog RGB computer signal is
being input.)
Set to On to automatically adjust Tracking, Sync., and
Position to the optimum state when the input signal
changes.
Resolution
(Only available when an analog RGB computer signal is
being input.)
Set to Auto to automatically identify the resolution of the
input signal. If images are not projected correctly when set
to Auto, for example if some of the image is missing, adjust
to Wide for wide screens, or set to Normal for 4:3 or 5:4
screens depending on the connected computer.
Tracking
(Only available when an analog RGB computer signal is
being input.)
You can adjust computer images when vertical stripes
appear in the images.
Submenu Function
Sync.
(Only available when an analog RGB computer signal is
being input.)
You can adjust computer images when flickering, fuzziness,
or interference appear in the images.
Position
(This item cannot be set when the source is HDMI or
DisplayPort.)
You can adjust the display position up, down, left, and right
when a part of the image is missing so that the whole image
is projected.
Progressive
(This setting can only be adjusted when a composite video
signal is being input. When a component video or RGB
video is being input, this setting can only be adjusted if the
signal being input is an interlaced signal (480i/576i/1080i).)
Interlace
g
(i) signal is converted to Progressive
g
(p). (IP
conversion)
Off: Ideal for images with a large amount of movement.
Video: Ideal for general video images.
Film/Auto: This is ideal for movie films, computer graphics,
and animation.
Noise Reduction
(This cannot be set when a digital RGB signal is input,
when projecting an interlaced signal while Progressive is set
to Off, or when a 480p, 576p, or 1080p signal is input while
Image Processing is set to Fast.)
Smoothes out rough images. There are two modes. Select
your favorite setting. It is recommended that this is set to
Off when viewing image sources in which noise is very low,
such as for DVDs.
HDMI Video
Range
When the projector's HDMI port is connected to a DVD
player, set the projector's video range according to the DVD
player's video range setting.
DisplayPort Vid‐
eo Range
When the projector's DisplayPort port is connected to a
computer, set the projector's video range according to the
computer's video range setting.
List of Functions
89
89

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Epson EB-1960 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Epson EB-1960

Epson EB-1960 Bedienungsanleitung - Holländisch - 153 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info