Bedienungsanleitung Epson EB-475Wi (Seite 84 von 165) (Englisch)

500216

Zoom out

Zoom in

Vorherige Seite

1/165

Nächste Seite

About EasyMP Monitor

EasyMP Monitor lets you carry out operations such as checking the status

of multiple Epson projectors that are connected to a network at a computer

monitor, and controlling the projectors from the computer.

You can download EasyMP Monitor from the following Web site.

http://www.epson.com

The following provides brief descriptions of the monitoring and control

functions that can be carried out using EasyMP Monitor.

• Registering projectors for monitoring and control

Projectors on the network can be searched for automatically, and you can

then select which projectors you want to register from the projectors that

are detected.

You can register target projectors by entering their IP addresses.

• Registered projectors can also be assigned to groups so that they can

be monitored and controlled in groups.

• Monitoring the status of registered projectors

You can check the power status (ON/OFF) for projectors and problems or

warnings that require attention by using the icons.

You can select groups of projectors or a single projector and then check

the cumulative lamp operating time or information such as input sources,

problems, and warnings for the projectors.

• Controlling registered projectors

Projectors can be selected in groups or as single projectors, and you can

then carry out operations for the selected projectors such as turning the

power on and off and switching their input sources.

You can use Web Control functions to change the settings in the

projector's configuration menu.

If there are certain control actions which are carried out regularly at

particular times or on particular days, you can use Timer Settings to

• Mail Notification settings

You can set e-mail addresses to which notifications are sent if a status

that requires attention, such as a problem, occurs with a registered

projector.

• Sending messages to registered projectors

You can use the Message Broadcasting plugin for EasyMP Monitor to

send JPEG files to registered projectors.

Download the Message Broadcasting plugin from the Web site address

provided at the beginning of this chapter.

Changing Settings Using a Web Browser (Web

Control)

By using the Web browser of a computer connected to the projector on a

network, you can set the projector's functions and control the projector.

This function allows you to perform setup and control operations remotely.

In addition, since you can use the computer's keyboard, entering characters

required for the setup is easier.

Use Microsoft Internet Explorer 6.0 or later as the Web browser. Use Safari

for Mac OS X.

If you set Standby Mode to Communication On, you can use a Web

browser to make settings and perform control even if the projector is

in standby mode (when the power is off).

s Extended - Standby Setup - Standby Mode p.103

Projector setup

In a Web browser, you can set items that are usually set in the projector's

Configuration menu. The settings are reflected in the Configuration menu.

There are also items that can only be set in a Web browser.

Monitoring and Controlling

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson EB-475Wi Seite 84

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson EB-475Wi

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info