Bedienungsanleitung Epson EB-685Wi (Seite 23 von 253) (Englisch)

675176

Zoom out

Zoom in

Vorherige Seite

1/253

Nächste Seite

Projector Placement

You can install the projector on a wall, or place it on a table to project images.

You need the optional mounts when suspending the projector from a ceiling,

installing it on a wall, or placing it vertically on a table.

Note the following points when selecting a projector location:

• Place the projector on a sturdy, level surface or install it using a compatible

mount.

• Leave plenty of space around and under the projector for ventilation, and

do not place it on top of or next to anything that could block the vents.

• Position the projector within reach of a grounded electrical outlet or

extension cord.

• Place the projector parallel to the screen.

If you cannot install the projector parallel to the screen, correct

keystone distortion using the projector controls.

Warning

• A special method of installation is required when suspending the projector from

a wall or ceiling. If you do not install the projector correctly, it could fall and

cause damage or injury.

• Do not use adhesives on the wall mount plate fixing points or the ceiling mount

fixing points to prevent the screws from loosening, or use lubricants, oils, or

similar substances on the projector; the projector case may crack causing it to fall

from its mount. This could cause serious injury to anyone under the mount and

could damage the projector.

• Do not cover the projector's air intake or air exhaust vents. If the vents are

covered, the internal temperature could rise and cause a fire.

• Do not install the projector on an unstable surface or in a location beyond the

weight specifications of the projector. Otherwise, it could fall or topple causing

an accident and injury.

• When installing the projector in a high position, take measures to prevent falling

by using wires to ensure safety in an emergency, such as an earthquake, and to

prevent accidents. If it is not installed correctly, it could fall causing an accident

and injury.

Attention

• If you are using the projector at altitudes above 1500 m, set the High Altitude

Mode setting to On in the projector's Extended menu to ensure the projector's

internal temperature is regulated properly.

s Extended > Operation > High Altitude Mode

• Try not to setup the projector in locations subject to high humidity and dust, or

in locations subject to smoke from fires or tobacco smoke.

gg Related Links

• "Projector Setup and Installation Options" p.23

• "Settings when Using the Interactive Features" p.24

• "Image Shape" p.55

• "Optional Accessories and Replacement Parts" p.235

• "Projector Setup Settings - Extended Menu" p.178

Projector Setup and Installation Options

You can set up or install your projector in the following ways:

Front/Rear

Attach the feet (if supplied) when using the projector on a surface such

as a desk.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson EB-685Wi Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson EB-685Wi

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info