Bedienungsanleitung Epson EB-720 (Seite 124 von 312) (Englisch)

737382

124

Zoom out

Zoom in

Vorherige Seite

1/312

Nächste Seite

Using the Interactive Features over a Network

124

You can use your projector in computer interactive mode over a network.

If you want to annotate when using computer interactive mode over a

network, you need to use Easy Interactive Tools (or another annotation

program). Easy Interactive Tools allows you to use various drawing tools,

treat the drawing area as a page, and save your drawings as a file for a later

use. You can download the software from the Epson website.

Use Epson iProjection (Windows/Mac) to setup your projector on a computer

network and use computer interactive mode over the network.

Select Use Interactive Pen on the General settings tab and Transfer layered

window on the Adjust performance tab.

See the Epson iProjection Operation Guide (Windows/Mac) for instructions.

• Number of pens or fingers you can use at the same time is as follows:

• Windows: two pens and six fingers

• Mac: one pen or one finger

• The response may be slower over the network.

• You can connect up to four projectors at one time using Epson

iProjection. When connected to multiple projectors, computer

interactive mode functions for any projector. Operations performed

on one projector are reflected in other projectors.

gg Related Links

• "Precautions when Connecting to a Projector on a Different Subnet" p.124

• "Getting the Latest Version of the Documents" p.10

Precautions when Connecting to a Projector on a

Different Subnet

Follow these precautions when you connect to a projector on a different

subnet using Epson iProjection (Windows/Mac) and use interactive features:

• Search for the projector on the network by specifying the projector's IP

address. You cannot search for it by specifying the projector name.

• Make sure that you get an echo reply back from the network projector when

sending an echo request by the ping command. When the Internet Control

Message Protocol (ICMP) option is disabled on the router, you can connect

to the projector at remote locations even if you cannot get the echo reply

back.

• Make sure the following ports are opened.

Port Protocol Usage Communication

3620 TCP/UDP For connection and

control

two-way

3621 TCP For transferring images two-way

3629 TCP For controlling projector two-way

• Make sure that the MAC address filtering and application filtering options

are configured properly on the router.

• When bandwidth management is applied for communications between

locations, and Epson iProjection goes over the controlled bandwidth, you

may not be able to connect to the projector at remote locations.

Epson does not guarantee the connection to the projector on a

different subnet using Epson iProjection even if you meet the above

requirements. When considering the implementation, be sure to test

the connection in your network environment.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson EB-720 Seite 124

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson EB-720

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info