737382
226
Zoom out
Zoom in
Vorherige Seite
1/312
Nächste Seite
Projector Administration Settings - Management Menu
226
Settings on the Management menu let you customize various projector
administrative features.
Setting Options Description
User Button Various menu
options available
Assigns a menu option to the [User]
button on the remote control for one-
touch access.
User's Logo Start Setting
Reset
Creates a screen that the projector
displays to identify itself and enhance
security.
User Pattern Captures a projected screen and saves it
as a pattern for display. Select Pattern
Display on the Display menu to display
the saved pattern.
Setting Options Description
Control Panel Lock Full Lock
Except for Power
Off
Controls projector button locking to
secure the projector:
Full Lock: locks all buttons.
Except for Power: locks all buttons
except the power button.
Off: no buttons locked.
Color Uniformity Color Uniformity Set to On to adjust the color tone balance
for the whole screen.
Adjustment Level Sets the adjustment level.
Start Adjustments Adjusts the red, green, and blue color
tones individually for the selected area.
Reset Resets all adjustment values on the Color
Uniformity menu to their default
settings.
Refresh Mode Timer Sets a time period during which the
projector displays the refresh image.
Messages Set to On to display a message informing
you that the projector is in refresh mode.
Start Starts the refresh mode process to clear
any projected afterimage and turn off the
projector after a specified period of time.
Press any button on the remote control
to cancel this process.
Light Source
Calibration
Run Now Starts light source calibration to optimize
the color balance of the currently
projected image. You may not be able to
start calibration if the projector's
environmental temperature is out of
range. (Wait 30 minutes after turning on
the projector before starting calibration
for the best results.)
Run Periodically Set to On to perform light source
calibration periodically every 100 hours
of usage.
Last Run Displays the date and time of the last
light source calibration.
226

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Epson EB-720 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Epson EB-720

Epson EB-720 Bedienungsanleitung - Deutsch - 325 seiten

Epson EB-720 Bedienungsanleitung - Holländisch - 324 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info