Bedienungsanleitung Epson EB-720 (Seite 271 von 312) (Englisch)

737382

271

Zoom out

Zoom in

Vorherige Seite

1/312

Nächste Seite

Solving Image or Sound Problems

271

Select the Display or Color LCD option, if necessary.

Click the Arrange or Arrangement tab.

Select Mirror Displays.

Solutions When "Not Supported" Message Appears

If the message "Not supported" is displayed, try the following solutions:

• Make sure the correct input signal is selected in the projector's Signal I/O

menu.

• Make sure the computer's display resolution does not exceed the projector's

resolution and frequency limits. If necessary, select a different display

resolution for your computer.

gg Related Links

• "Input Signal Settings - Signal I/O Menu" p.218

• "Supported Monitor Display Resolutions" p.292

Solutions When Only a Partial Image Appears

If only a partial computer image appears, try the following solutions:

• If you are projecting from a computer using a VGA computer cable, press

the [Auto] button on the remote control to optimize the image signal.

• Make sure you selected the correct Screen Type setting in the projector's

Installation menu for the screen you are using.

If there are margins between the edge of the image and the projected screen

frame, adjust the position of the image.

• Make sure the Scale setting is turned off in the projector's Image menu

(EB‑755F/EB‑750F).

• Try adjusting the image position using the Position setting in the

projector's Image menu.

s Image > Analog Signal Adjustment > Position

If you have adjusted the image size using the Wide and Tele buttons or

corrected keystone distortion, perform Image Shift to adjust the image

position.

s Installation > Digital Zoom > Image Shift

• Press the [Aspect] button on the remote control to select a different image

aspect ratio.

• Change the Resolution setting in the projector's Image menu according to

the signal for the connected equipment.

• If you zoomed into or out of the image using the [E-Zoom] buttons, press

the [Esc] button until the projector returns to a full display.

• Check your computer display settings to disable dual display and set the

resolution within the projector's limits.

• Check the resolution assigned to your presentation files to see if they are

created for a different resolution.

• When projecting in Content Playback mode, make sure you are using the

appropriate Overlay Effect settings (EB‑755F/EB‑750F).

s Operation > Content Playback > Overlay Effect

• Make sure you selected the correct Projection setting in the projector's

Installation menu.

gg Related Links

• "Projector Installation Settings - Installation Menu" p.220

• "Image Quality Settings - Image Menu" p.216

• "Supported Monitor Display Resolutions" p.292

• "Adjusting the Image Position Using Screen Position" p.57

• "Adding Effects to Your Projected Image" p.138

Solutions When the Image is not Rectangular

If the projected image is not evenly rectangular, try the following solutions:

• Place the projector directly in front of the center of the screen, facing it

squarely, if possible.

• Press the keystone buttons on the projector to adjust the image shape.

• Adjust the Quick Corner setting to correct the image shape.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson EB-720 Seite 271

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson EB-720

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info