Bedienungsanleitung Epson EB-725Wi (Seite 273 von 312) (Englisch)

737380

273

Zoom out

Zoom in

Vorherige Seite

1/312

Nächste Seite

Solving Image or Sound Problems

273

• Adjust the Sharpness setting in the projector's Image menu to improve

image quality.

• If you are projecting from a computer using a VGA computer cable, press

the [Auto] button on the remote control to automatically adjust the

Tracking and Sync. settings. If any bands or overall blurriness remain,

display a uniformly patterned image on the screen and manually adjust the

Tracking and Sync. settings.

s Image > Analog Signal Adjustment > Tracking

s Image > Analog Signal Adjustment > Sync.

• If you are projecting from a computer, use a lower resolution or select a

resolution that matches the projector's native resolution.

gg Related Links

• "Image Quality Settings - Image Menu" p.216

• "Input Signal Settings - Signal I/O Menu" p.218

• "Supported Monitor Display Resolutions" p.292

• "Focusing the Image" p.59

• "Cleaning the Projection Window" p.252

Solutions When the Image Brightness or Colors are

Incorrect

If the projected image is too dark or light, or the colors are incorrect, try the

following solutions:

• Press the [Color Mode] button on the remote control to try different color

modes for the image and environment.

• Check your video source settings.

• Adjust the available settings in the projector's Image menu for the current

input source, such as Brightness, Contrast, Tint, Color Saturation, and

RGBCMY.

• Make sure you selected the correct Signal Format or EDID setting in the

projector's Signal I/O menu, if available for your image source.

• Make sure all the cables are securely connected to the projector and your

video device. If you connected long cables, try connecting shorter cables.

• Position the projector close enough to the screen.

• When using multiple projectors, make sure the Light Source Calibration

setting in the projector's Management menu is set to the same option on all

the projectors and that the projectors have been calibrated recently. If

certain projectors are not calibrated recently, the white balance and

brightness level may not match the other projectors.

gg Related Links

• "Image Quality Settings - Image Menu" p.216

• "Input Signal Settings - Signal I/O Menu" p.218

• "Projector Administration Settings - Management Menu" p.226

• "Adjusting Image Quality (Color Mode)" p.82

Solutions When an Afterimage Remains on the

Projected Image

If you see an afterimage in the projected image, use the Refresh Mode feature

to clear it. Select Refresh Mode > Start in the projector's Management menu.

gg Related Links

• "Projector Administration Settings - Management Menu" p.226

Solutions to Sound Problems

If there is no sound or the volume is too low or high, try the following

solutions:

• Adjust the projector's volume settings.

• Press the [A/V Mute] button on the remote control to resume video and

audio if they were temporarily stopped.

• Check your computer or video source to make sure the volume is turned up

and the audio output is set for the correct source.

• Check the audio cable connections between the projector and your video

source.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson EB-725Wi Seite 273

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson EB-725Wi

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info