537542
90
Zoom out
Zoom in
Vorherige Seite
1/149
Nächste Seite
Submenu Function
Projection
Select from one of the following projection methods
depending on how the projector is installed.
Front, Front/Ceiling, Rear, and Rear/Ceiling
You can change the setting as follows by pressing down
the [A/V Mute] button on the remote control for about five
seconds.
Front
W
Front/Ceiling
RearWRear/Ceiling
s "Installation Methods" p.22
Operation
Direct Power On: Set to On to turn on the projector
simply by plugging it in.
When the power cord is plugged in, note that the projector
turns on automatically in cases such as a power outage
being restored.
High Altitude Mode: Set to On when using the projector
above an altitude of 1500 m.
Startup Source Search: Set to On to project images from
the port currently receiving an image when the projector
starts.
Submenu Function
A/V Settings
A/V Output: (This item can be set only if Standby Mode is
set to Communication On.)
When the projector is in standby status, set to Always On
in the following situations.
When outputting audio and images to external equipment.
When outputting audio from the microphone to the
projector's speaker.
a
The fan may rotate in standby status. Also,
when the projector wakes from standby
status, the fan may make a loud noise as it
rotates, but this is not a malfunction.
Audio Output: Select the audio output when projecting
images from the Computer1, Computer2, S-Video, or Video
input ports. When set to Auto, the audio from the audio
input port that matches each image input port is output. In
standby status, the audio from the last selected source is
output.
s "Connecting Equipment" p.26
HDMI Audio Output: Select the audio source when
projecting images from the HDMI input port. Select HDMI
to output the image's audio as it is.
Plug-in Power: When set to On, you can use a microphone
with Plug-in Power support.
Language
You can set the language for messages and menus.
Reset
You can reset the adjustment values for Display
*1
,
Operation
*2
, and A/V Settings
*3
from the Extended menu
to their default settings.
See the following to return all menu items to their default
settings.
s
"Reset Menu" p.101
*1When User's Logo Protect is set to On in Password Protect, settings related
to user's logo cannot be changed. You can make changes after setting User's
Logo Protect to Off.
List of Functions
90
90

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Epson EB-98 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info