Bedienungsanleitung Epson EB-992F (Seite 150 von 210) (Englisch)

737387

150

Zoom out

Zoom in

Vorherige Seite

1/210

Nächste Seite

Projector Information Display - Info Menu

150

Information item Description

Refresh Rate Displays the refresh rate of the current input source.

Sync Info Displays information that may be needed by a service

technician.

Status Displays information about projector problems that

may be needed by a service technician.

Serial Number Displays the projector's serial number.

Event ID Displays the Event ID number corresponding to a

network problem; see the list of Event ID codes.

(Available only for models that support network

projection.)

gg Related Links

• "Event ID Code List" p.150

• "List of Functions" p.10

Event ID Code List

If the Event ID option on the Projector Info menu displays a code number,

check this list of Event ID codes for the solution to the projector problem

associated with the code.

If you cannot resolve the problem, contact your network administrator or

Epson for technical support.

Event ID

code

Cause and solution

0432

0435

The network software did not start. Turn the projector off and then

on again.

0433 Cannot display the transferred images. Restart the network software.

0434

0481

0482

0485

Unstable network communication. Check the network

communication status, wait a few moments, and try connecting to

the network again.

Event ID

code

Cause and solution

0483

04FE

The network software quit unexpectedly. Check the network

communication status, then turn the projector off and then on again.

0484 Communication with computer was disconnected. Restart the

network software.

0479

04FF

A projector system error has occurred. Turn the projector off and

then on again.

0891 Cannot find an access point with the same SSID. Set your computer,

access point, and projector to the same SSID.

0892 The WPA/WPA2/WPA3 authentication type does not match. Make

sure the wireless network security settings are correct.

0893 The TKIP/AES encryption type does not match. Make sure the

wireless network security settings are correct.

0894 Communication with an unauthorized access point was

disconnected. Contact your network administrator.

0895 Communication with a connected device was disconnected. Check

your device connection status.

0898 Failed to acquire DHCP. Make sure the DHCP server is operating

correctly. If you are not using DHCP, set the DHCP setting to Off in

the projector's Network menu.

s Network > Network Configuration > Wireless LAN > IP

Settings > DHCP

s Network > Network Configuration > Wired LAN > IP Settings

> DHCP

0899 Other communication errors.

089A The EAP authentication type does not match the network. Check the

wireless LAN security settings and make sure that the security

certificate is installed correctly.

089B EAP server authentication failed. Check the wireless LAN security

settings and make sure that the security certificate is installed

correctly.

089C EAP client authentication failed. Check the wireless LAN security

settings and make sure that the security certificate is installed

correctly.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson EB-992F Seite 150

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson EB-992F

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info