Bedienungsanleitung Epson EB-G5750WU (Seite 15 von 171) (Englisch)

500240

Zoom out

Zoom in

Vorherige Seite

1/171

Nächste Seite

Name Function

[Aspect] button

The

Aspect Ratio

changes each time the button is

pressed. s p.27

[ID] button

Press to set the remote control ID. s p.39

[Help] button

Displays and closes the Help screen which shows you how

to deal with problems if they occur. s p.78

Remote port

Connects the optional remote control cable set and

outputs signals from the remote control.

When the remote control cable is plugged into this remote

port, the remote receiver is disabled.

[Volume] button

[

][ ]

[

] Decreases the volume. [ ] Increases the volume.

s Quick Start Guide

Caution

Do not start when the volume is set too high.

Loud sounds may cause loss of hearing. Always low-

er the volume before turning off the projector. Grad-

ually increase the volume after turning on the pro-

jector.

[Num] button

Use this button to enter passwords, IP Address from the

Network, and so on.

Numeric buttons

Use this button to enter passwords, remote control ID

settings, IP Address from the Network, and so on.

[Color Mode] button

Each time the button is pressed, the Color Mode changes.

s p.29

[Freeze] button

Images are paused or unpaused. s p.34

[E-Zoom] buttons

[

][

]

The [z] button enlarges the image without changing the

projection size.

The [x] button reduces the parts of images that have been

enlarged using the [z] button. s p.36

[Pointer] button

Press to activate the on screen pointer. s p.35

Name Function

[Esc] button

Stops the current function. If pressed when the

configuration menu is displayed, it moves to the previous

menu level.

p.50

Acts as a mouse's right button when using the optional

wireless mouse receiver.

[User] button

Press to assign a frequently used item from the six

available configuration menu items. By pressing the

button the assigned menu item selection/adjustment

screen is displayed, allowing you to make one-touch

settings/adjustments. s p.55

Test Pattern is assigned as the default setting.

[LAN/USB] button

Each time you press this button, the image is switched

between the image from a computer that is connected to

the projector through the network and the image from the

USB device that is connected to the USB(TypeA) port.

ID switch

Use this switch to enable (On)/disable (Off) ID settings for

the remote control. s p.38

[DVI-D/HDMI] button

Each time the button is pressed, the image displayed

changes between DVI-D input port and the HDMI input

port.

[Source Search]

button

Changes to the next input source that is connected to the

projector and is sending an image. s p.25

Indicators

A light is emitted when outputting remote control signals.

Remote control light-

emitting area

Outputs remote control signals.

Installing the batteries

The batteries are not set in the remote control when it is sold. Set the

supplied batteries (two, AA alkaline batteries) to use the remote control.

Part Names and Functions

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson EB-G5750WU Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson EB-G5750WU

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info