Bedienungsanleitung Epson EB-G5950 (Seite 62 von 180) (Englisch)

500246

Zoom out

Zoom in

Vorherige Seite

1/180

Nächste Seite

Sub Menu Function

Operation

Direct Power On: You can set whether or not (On/Off) to enable Direct Power On.

Be careful when this item is set to On because this unit turns on at the time of power recovery with this unit plugged-in to an outlet.

Sleep Mode: When set to On, this automatically stops projection when no image signal is being input and no operations are carried

out.

Sleep Mode Timer: When Sleep Mode is set to On, you can set the time before the projector automatically turns off within a range of 1 to

30 minutes.

High Altitude Mode: Set to On when using the projector above an altitude of 1500 m.

BNC Sync Termination: Set the termination for the signal from the BNC input port. This should usually be set to Off. Set to On when

analog (75Ω) termination such as for switchers is necessary.

Remote Control Type: You can select Normal or Simple depending on the type of remote control.

Set this item to Normal to use the remote control provided with the projector. When Simple is selected, you can use the remote control

provided with other Epson projectors to operate this projector. This is useful if you want to use a remote control that you are already

familiar with to operate the projector. (When using the remote control that is supplied with an EB-G50xx to EB-G53xx-series or EB-

Z80xx-series projector, select Normal.)

However, you cannot use the remote control provided with this projector if this is set to Simple. Make sure that the setting is correct

because, if the projector is mounted on the ceiling or somewhere hard to reach, changing it back to Normal may be difficult. Additionally,

you cannot use the functions that are not equipped with this projector or the remote control which you use.

Inv Direction Button: Set this to On when suspending the projector from the ceiling. s p.131

Standby Mode

You can use the functions that monitor and control the status of the projector over the network even when the projector is in standby mode

if this is set to Communication On.

Air Filter Notice

You can set whether or not (On/Off) to enable Air Filter Notice. When this is set to On and a clog in the air filter is detected, the message

is displayed on the screen.

Projector ID

Set the ID within a range of 1 to 9. Off indicates that no ID is set. s p.42

Multi-screen

You can adjust the hue and brightness of each projected image when two or more projectors are lined up and projecting. s p.45

Adjustment Level: You can adjust from black to white in five stages called Level 1 to 5, and in each of these 5 levels you can adjust

Brightness Correct. and Color Correct.

Brightness Correct.: Corrects the difference in the brightness of each projector.

Color Correct. (G/R) / Color Correct. (B/Y): You can correct the difference in the color of each projector.

Language

You can set the Language for message displays.

Extended Menu

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson EB-G5950 Seite 62

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson EB-G5950

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info