Bedienungsanleitung Epson EB-L1300U (Seite 132 von 254) (Englisch)

675205

132

Zoom out

Zoom in

Vorherige Seite

1/254

Nächste Seite

Submenu Function

Lock Setting

Control Panel Lock: You can use this to restrict operation of the

projector's control panel.

s "Control Panel Lock" p.119

Lens Lock: When set to On, [Lens Shift], [Zoom], and [Focus]

button operations on the remote control are disabled.

s "Lens Lock" p.120

Brightness Set‐

tings

Light Source Mode: Set the brightness for the light source.

 Normal: Select this if you do not want to decrease the

brightness. This makes the target usage time approximately

20,000 hours.

 Quiet: Select this if you are concerned about the noise made by

the fan, This sets the brightness at 70%. This makes the target

usage time 20,000 hours.

 Extended: Select this to extend the life expectancy of the light

source. This sets the brightness at 70%. This makes the target

usage time approximately 30,000 hours.

 Custom: Select this to set the brightness level within a range of

30 to 100%.

Brightness Level: (Only available when Light Source Mode is set

to Custom) Sets the brightness for the light source.

Constant Brightness: (Only available when Light Source Mode

is set to Custom) When set to On, the brightness of the light

source set in Brightness Level is maintained as it is. When

Constant Brightness is set to On, you cannot change the settings

for Light Source Mode and Brightness Level.

s "Setting the Brightness" p.74

Estimated Remains: When Constant Brightness is set to On,

this indicates the amount of time for which constant brightness

can be maintained.

s "Guide to Estimated Remains" p.76

Submenu Function

Remote Receiver

You can limit the reception of the operation signal from the

remote control.

When set to Off, you cannot perform any operations from the

remote control. If you want to make operations from the remote

control, hold down the [Menu] button on the remote control for

at least 15 seconds to reset the setting to its default value.

User Button

Select the items in the Configuration menu that you want to

assign to the [User1], [User2], and [User3] buttons on the remote

control. The following items can be assigned.

Light Source Mode, Multi-Projection, Resolution, Image

Processing, On-Screen Display, Display the QR Code, Image

Enhancement, Frame Interpolation, Screen Matching, Color

Calibration

Test Pattern

You can display a test pattern to adjust the projection without

connecting other equipment when you set up the projector.

s "Displaying a Test Pattern" p.31

Memory

Perform operations and make settings for the memory function.

s "Memory Function" p.111

Reset

You can reset all adjustment values on the Settings menu to their

default settings, except for User Button and Memory.

See the following to return all menu items to their default

settings.

s "Reset Menu" p.146

List of Functions

132

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson EB-L1300U Seite 132

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson EB-L1300U

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info